Fx ret
dj-filippo241·maelcum_mixer·pcb/fx-ret/fx-ret.kicad_pcb
About the Fx ret PCB
Fx ret is an open source PCB design by dj-filippo241, published on GitHub. It is a 4-layer board measuring 100 × 220 mm, with 197 components from 74 distinct parts.
Other key parts include the OPA1612AIDR, OPA1642AIDR, OPA1654AIDR, V2181L and LM317. By type, the board carries 90 resistors, 63 capacitors, 18 ICs, 13 diodes, 4 connectors and 3 inductors.
From the project
Mixer dub modulare 100% analogico: design doc e simulazioni LTspice
A one-off, fully analogue, modular dub performance mixer for a 5-way sound system.
Musical decisions and panel layout: Filippo. Engineering (topologies, simulations, PCB generation): Claude, under Filippo's review.
Status. Nothing has been built or measured on a bench yet. Every circuit number comes from LTspice simulation or from Python models. The musical behaviour (control laws, saturators, filter character) is being validated by ear on a Max for Live prototype. Component purchases are on hold until that prototype is complete. The PCBs are generated drafts.
Main components on the Fx ret
Fx ret bill of materials (BOM)
197 components, 74 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | OPA1612AIDR | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U4, U5, U6, U30, U31, U46 |
| 1 | OPA1642AIDR | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 3 | OPA1654AIDR | SOIC-14_3.9x8.7mm_P1.27mm | U7, U8, U9 |
| 2 | V2181L | SOIC-8_3.9x4.9mm_P1.27mm | U28, U29 |
| 1 | LM317 | TO-220-3_Vertical | U40 |
| 1 | LM337 | TO-220-3_Vertical | U41 |
| 1 | LT3045EMSE | MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm | U44 |
| 1 | LT3094EMSE | MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm | U45 |
| 1 | BD139 | TO-126-3_Vertical | Q40 |
| 1 | BD140 | TO-126-3_Vertical | Q41 |
| 1 | C96 maschio | DIN41612_C_3x32_Male_Horizontal_THT | J1 |
| 1 | 2x18 cavo piatto | PinHeader_2x18_P2.54mm_Vertical | J2 |
| 1 | 1x7 jack pedale | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | 2x16 ponte reroute | PinHeader_2x16_P2.54mm_Vertical | J4 |
| 3 | 50k | Potentiometer_Bourns_3266W_Vertical | RV1, RV2, RV4 |
| 1 | 2k | Potentiometer_Bourns_3266W_Vertical | RV3 |
| 6 | 1N4148W | D_SOD-123 | D1, D3, D10, D11, D12, D13 |
| 2 | S1G | D_SMA | D2, D4 |
| 1 | LM4040-5.0 | SOT-23 | D5 |
| 4 | TVS bidir <=5 pF | D_SOD-323 | D6, D7, D8, D9 |
Show 54 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ferrite 600R | L_1206_3216Metric | FB1, FB2, FB3 |
| 2 | 220u 35V | CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 1 | 47u 10V | CP_Radial_D5.0mm_P2.00mm | C3 |
| 2 | 10u 35V | CP_Radial_D5.0mm_P2.00mm | C4, C8 |
| 2 | 47u 35V | CP_Radial_D6.3mm_P2.50mm | C5, C9 |
| 2 | 470u 25V | CP_Radial_D8.0mm_P3.50mm | C6, C10 |
| 2 | 100u 25V | CP_Radial_D6.3mm_P2.50mm | C7, C11 |
| 4 | 4u7 25V | C_1206_3216Metric | C12, C13, C15, C16 |
| 2 | 10u 25V | C_1206_3216Metric | C14, C17 |
| 1 | 1u | C_1206_3216Metric | C18 |
| 28 | 100n | C_0805_2012Metric | C19, C20, C23, C24, C25, C26, C29, C30 +20 |
| 2 | 10p C0G | C_0805_2012Metric | C21, C22 |
| 2 | 15n C0G | C_1206_3216Metric | C27, C28 |
| 4 | 180n C0G | C_1206_3216Metric | C35, C36, C43, C44 |
| 4 | 10n C0G | C_1206_3216Metric | C37, C38, C45, C46 |
| 1 | 47p C0G | C_0805_2012Metric | C49 |
| 1 | 100n C0G | C_1206_3216Metric | C50 |
| 2 | 22p C0G | C_0805_2012Metric | C55, C58 |
| 1 | 56n C0G | C_1210_3225Metric | C61 |
| 2 | 120 1% | R_0805_2012Metric | R1, R4 |
| 2 | 1k74 1% | R_0805_2012Metric | R2, R5 |
| 3 | 1k | R_0805_2012Metric | R3, R6, R53 |
| 2 | 150k 0.1% | R_0805_2012Metric | R7, R8 |
| 1 | 1k5 | R_0805_2012Metric | R9 |
| 19 | 10k 0.1% | R_0805_2012Metric | R10, R11, R12, R14, R18, R23, R33, R34 +11 |
| 4 | 100 | R_0805_2012Metric | R13, R15, R16, R21 |
| 6 | 1M | R_0805_2012Metric | R17, R19, R20, R22, R24, R25 |
| 2 | 1k24 0.1% | R_0805_2012Metric | R26, R38 |
| 2 | 3k24 0.1% | R_0805_2012Metric | R27, R39 |
| 3 | 4k02 0.1% | R_0805_2012Metric | R28, R40, R52 |
| 4 | 324 0.1% | R_0805_2012Metric | R29, R30, R41, R42 |
| 2 | 5k23 0.1% | R_0805_2012Metric | R31, R43 |
| 2 | 2k49 0.1% | R_0805_2012Metric | R32, R44 |
| 6 | 49k9 0.1% | R_0805_2012Metric | R35, R36, R37, R47, R48, R49 |
| 6 | 20k 0.1% | R_0805_2012Metric | R50, R51, R63, R67, R69, R73 |
| 1 | 3M | R_0805_2012Metric | R54 |
| 2 | 6k19 | R_0805_2012Metric | R64, R70 |
| 2 | 150k | R_0805_2012Metric | R65, R71 |
| 2 | 51 | R_0805_2012Metric | R66, R72 |
| 2 | 47 | R_0805_2012Metric | R68, R74 |
| 1 | 43.2k 0.1% | R_0805_2012Metric | R75 |
| 1 | 68.1k 0.1% | R_0805_2012Metric | R76 |
| 1 | 357k 0.1% | R_0805_2012Metric | R77 |
| 1 | 20.0k 0.1% | R_0805_2012Metric | R78 |
| 1 | 38.3k 0.1% | R_0805_2012Metric | R79 |
| 1 | 976 0.1% | R_0805_2012Metric | R80 |
| 1 | 1.33k 0.1% | R_0805_2012Metric | R81 |
| 1 | 9k76 0.1% | R_0805_2012Metric | R83 |
| 1 | 18k7 0.1% | R_0805_2012Metric | R84 |
| 1 | 100k | R_0805_2012Metric | R85 |
| 1 | 18k2 0.1% | R_0805_2012Metric | R86 |
| 2 | 1k 0.1% | R_0805_2012Metric | R87, R89 |
| 1 | 17k4 0.1% | R_0805_2012Metric | R88 |
| 1 | 2M7 | R_0805_2012Metric | R90 |
Fx ret design files
The KiCad project lives in the dj-filippo241/maelcum_mixer repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/fx-ret/fx-ret.kicad_pcb
- Schematicpcb/fx-ret/fx-ret.kicad_sch
- BOMpcb/fx-ret/bom.csv
Fx ret: common questions
How big is the Fx ret PCB?
The Fx ret measures 100 × 220 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Fx ret?
197 components, from 74 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fx ret design files?
From the dj-filippo241/maelcum_mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fx ret design in my own project?
The repository has no license, so all rights stay with dj-filippo241. Use it as a reference, and ask the author before reusing the design.
More boards in maelcum_mixer
Master segnale
dj-filippo241
100 × 220 mm275 parts4LNo license2Fx ret reroute
dj-filippo241
100 × 220 mm221 parts4LNo license2Mic
dj-filippo241
100 × 220 mm204 parts4LNo license2Canale
dj-filippo241
100 × 220 mm191 parts4LNo license2Master uscita-L
dj-filippo241
100 × 220 mm153 parts4LNo license2Master uscita-R
dj-filippo241
100 × 220 mm142 parts4LNo license2Mono
dj-filippo241
100 × 220 mm125 parts4LNo license2Fx send
dj-filippo241
100 × 220 mm118 parts4LNo license2Psu in
dj-filippo241
100 × 220 mm39 parts4LNo license2Mic comandi
dj-filippo241
59 × 186 mm10 parts4LNo license2Mono comandi
dj-filippo241
59 × 186 mm9 parts4LNo license2