Mic comandi
dj-filippo241·maelcum_mixer·pcb/mic/comandi/mic-comandi.kicad_pcb
About the Mic comandi PCB
Mic comandi is an open source PCB design by dj-filippo241, published on GitHub. It is a 4-layer board measuring 59 × 186 mm, with 10 components from 5 distinct parts.
By type, the board carries 1 connector, 1 switch and 1 diode.
From the project
Mixer dub modulare 100% analogico: design doc e simulazioni LTspice
A one-off, fully analogue, modular dub performance mixer for a 5-way sound system.
Musical decisions and panel layout: Filippo. Engineering (topologies, simulations, PCB generation): Claude, under Filippo's review.
Status. Nothing has been built or measured on a bench yet. Every circuit number comes from LTspice simulation or from Python models. The musical behaviour (control laws, saturators, filter character) is being validated by ear on a Max for Live prototype. Component purchases are on hold until that prototype is complete. The PCBs are generated drafts.
Mic comandi bill of materials (BOM)
10 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2x12 cavo piatto | PinHeader_2x12_P2.54mm_Vertical | J1 |
| 1 | 5k C | Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
| 6 | 10k | Potentiometer_Alps_RK09L_Single_Vertical | RV2, RV3, RV4, RV5, RV6, RV7 |
| 1 | tasto MUTE | SW_PUSH_6mm | SW1 |
| 1 | LED bicolore VR 3 mm | LED_D3.0mm-3 | D1 |
Mic comandi design files
The KiCad project lives in the dj-filippo241/maelcum_mixer repository on GitHub; these links point at the commit this page was built from.
Mic comandi: common questions
How big is the Mic comandi PCB?
The Mic comandi measures 59 × 186 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mic comandi?
10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mic comandi design files?
From the dj-filippo241/maelcum_mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mic comandi design in my own project?
The repository has no license, so all rights stay with dj-filippo241. Use it as a reference, and ask the author before reusing the design.
More boards in maelcum_mixer
Master segnale
dj-filippo241
100 × 220 mm275 parts4LNo license2Fx ret reroute
dj-filippo241
100 × 220 mm221 parts4LNo license2Mic
dj-filippo241
100 × 220 mm204 parts4LNo license2Fx ret
dj-filippo241
100 × 220 mm197 parts4LNo license2Canale
dj-filippo241
100 × 220 mm191 parts4LNo license2Master uscita-L
dj-filippo241
100 × 220 mm153 parts4LNo license2Master uscita-R
dj-filippo241
100 × 220 mm142 parts4LNo license2Mono
dj-filippo241
100 × 220 mm125 parts4LNo license2Fx send
dj-filippo241
100 × 220 mm118 parts4LNo license2Psu in
dj-filippo241
100 × 220 mm39 parts4LNo license2Mono comandi
dj-filippo241
59 × 186 mm9 parts4LNo license2