HardLabs

Kicad firmware generation

DLR-RY·kicad_firmware_generation·example/schematics/example.kicad_sch

This repository ships a schematic but no board layout.
Simulate this board

About the Kicad firmware generation PCB

Kicad firmware generation is an open source AVR/Arduino PCB design by DLR-RY, published on GitHub under the MIT license. It is a board, with 15 components from 7 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the TPL5010. By type, the board carries 6 resistors, 5 LEDs, 2 ICs, 1 connector and 1 capacitor.

From the project

- schematics contains the input KiCad schematics, - pindefs.h is the final output file. Our tools automatically generate it. - template.jinja2 is the template to generate the output with, - kicadnetlist.xml is the intermediary KiCad Netlist and - groupnetlist.xml is the intermedi

- schematics contains the input KiCad schematics, - pindefs.h is the final output file. Our tools automatically generate it. - template.jinja2 is the template to generate the output with, - kicadnetlist.xml is the intermediary KiCad Netlist and - groupnetlist.xml is the intermediary Group Netlist.

Main components on the Kicad firmware generation

ATmega328P-PTPL5010

Kicad firmware generation bill of materials (BOM)

15 components, 7 distinct parts.

QtyPartRefs
1
ATmega328P-P
U101
1
TPL5010
U102
1
ISP
J101
5
LED
Led201, Led301, Led401, Led501, Led601
1
100n
C101
1
22k021
R101
5
100R
R201, R301, R401, R501, R601

Kicad firmware generation design files

The KiCad project lives in the DLR-RY/kicad_firmware_generation repository on GitHub; these links point at the commit this page was built from.

Kicad firmware generation: common questions

What microcontroller does the Kicad firmware generation use?

The Kicad firmware generation is built around the ATmega328P-P, from the AVR/Arduino family.

How many components are on the Kicad firmware generation?

15 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad firmware generation design files?

From the DLR-RY/kicad_firmware_generation repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.

Can I use the Kicad firmware generation design in my own project?

Yes, under the terms of its MIT license, which DLR-RY chose for the repository.

Can I test firmware for the Kicad firmware generation without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards