Daughterboard
DM-PRO-17-A·daughterboard
About the Daughterboard PCB
Daughterboard is an open source Silicon Labs PCB design by DM-PRO-17-A, published on GitHub. It is a 2-layer board measuring 70 × 90 mm, with 60 components from 22 distinct parts.
Its main chip is the EFM32G230F128, from the Silicon Labs family. Other key parts include the LD1117S33CTR and TB6612FNG. By type, the board carries 29 connectors, 16 capacitors, 4 resistors, 3 ICs, 3 diodes and 1 crystal.
From the project
PCB for the PYNQ daughterboard
Main components on the Daughterboard
Daughterboard bill of materials (BOM)
60 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33CTR | SOT-223 | U1 |
| 1 | TB6612FNG | SOIC-24 | U2 |
| 1 | EFM32G230F128 | QFN-64-1EP_9x9mm_Pitch0.5mm | U3 |
| 1 | Crystal | ABM11 | Y1 |
| 1 | USB_OTG | USB_Micro-B | J1 |
| 1 | MotorA | JST_XH_B02B-XH-A_02x2.50mm_Straight | J2 |
| 1 | MotorB | JST_XH_B02B-XH-A_02x2.50mm_Straight | J3 |
| 1 | BARREL_JACK | Barrel | J4 |
| 1 | Debug | SOIC-20 | J5 |
| 21 | J | Measurement_Point_Round-SMD-Pad_Small | J6, J7, J10, J11, J12, J13, J14, J15 +13 |
| 1 | QTR-8A | JST_XH_B10B-XH-A_10x2.50mm_Straight | J33 |
| 2 | CONN_01X02 | Pin_Header_Straight_1x02 | P1, P2 |
| 3 | Button | WS-TASV | BTN1, BTN2, BTN3 |
| 1 | ARDUINO_SHIELD | UNO_SHIELD | SHIELD1 |
| 3 | LED | LED-0402 | D1, D2, D3 |
| 2 | 47uF | c_elec_5x5.3 | C1, C2 |
| 8 | 100nF | C_0402 | C3, C6, C7, C8, C9, C10, C11, C12 |
| 3 | 10uF | C_0603 | C4, C5, C13 |
| 1 | 1uF | C_0805 | C14 |
| 2 | 10pF | C_0402 | C15, C16 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_0805 | R1 |
| 3 | R | R_0402 | R2, R3, R4 |
Daughterboard design files
The KiCad project lives in the DM-PRO-17-A/daughterboard repository on GitHub; these links point at the commit this page was built from.
- Layoutdaughterboard.kicad_pcb
Daughterboard: common questions
What microcontroller does the Daughterboard use?
The Daughterboard is built around the EFM32G230F128, from the Silicon Labs family.
How big is the Daughterboard PCB?
The Daughterboard measures 70 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Daughterboard?
60 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Daughterboard design files?
From the DM-PRO-17-A/daughterboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Daughterboard design in my own project?
The repository has no license, so all rights stay with DM-PRO-17-A. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Daughterboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25