37 open source boards using the LD1117S33CTR
Real designs built with the LD1117S33CTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Diy projector clock
shufps
77 × 100 mm63 parts2LNo license168STM32
DingoPDM
corygrant
72.4 × 95.3 mm151 parts4LMIT128AVR/Arduino
4chord midi
sgreg
74.8 × 84.7 mm60 parts2LNo license36AVR/Arduino
IBus BT digital module
the-vty
60 × 40 mm56 parts2LLGPL-3.033Shiva
UC3Music
99.8 × 99.8 mm70 parts2LNo license13ESP8266
Mirobot
mirobot
110 × 31.5 mm42 parts2LNo license12STM32
Parkbrake
mumme74
101.6 × 114.3 mm353 parts2LNo license7STM32
5x5
dijkstrw
100 × 100 mm85 parts2LBSD-3-Clause6ESP32
Osh vacuum
hkienle
101 × 56 mm55 parts2LNo license6STM32
Siemens-LinuxCNC-Interface
PedPEx
235 × 119.4 mm93 parts2LGPL-3.05Kicad p1-port thingie
ehjortberg
45.7 × 28.5 mm16 parts2LNo license5RP2040/RP2350
Supra expor-1-PANEL
jsenzel1
50.5 × 128.5 mm127 parts2LNo license4Prototipo-R820T2
gmtii
77.6 × 37.9 mm98 parts2LMIT2ESP8266
MeArm-Wireless
mimeindustries
65 × 56 mm27 parts2LNo license2Silicon Labs
Motherboard
HashDefineElectronics
50.8 × 20.8 mm21 parts2LNo license2Synth psoc v1
pmusgrave
203.2 × 101.6 mm243 parts4LNo license1NXP
Snap badge hardware
synapse-wireless
63.5 × 127 mm138 parts2LNo license1Gen 1 Hayabusa ECU
HasiKe
148 × 111.5 mm293 parts2LNo license0Kicad stuff
ryanmaclean
360 × 130 mm128 parts4LMIT0STM32
Heizrelaissteuerung
robin7331
155.6 × 86 mm93 parts2LNo license0STM32
Main board
tuankiet65
100.3 × 67.3 mm80 parts2LNo license0ESP8266
Smart home
BajaCali
74 × 64 mm72 parts2LMIT0ESP8266
Projeto poplock
fabriciorit
95.3 × 53.3 mm62 parts2LMIT0Silicon Labs
Daughterboard
DM-PRO-17-A
70 × 90 mm60 parts2LNo license0ESP32
COFFEE MAKER
liammchugh
131.4 × 99.7 mm55 parts2LNo license0STM32
Cc1120-dev
mck1117
40 × 40 mm34 parts4LNo license0STM32
Epilepsy-Electronics
pawel-dzialo
71.5 × 69.5 mm30 parts4LNo license0ESP8266
WifiLightsController
David-Estevez
49.8 × 22 mm11 parts2LNo license0- schematic only · 22 partsSTM32
Maze bot
danielljeon
22 parts4LNo license0 NXP
Airsuspension controller
mumme74
109.2 × 114.3 mm132 parts2LNo license7RP2040/RP2350
Supra board
jsenzel1
49.5 × 106 mm119 parts2LNo license4ESP32
Shack Relay Matrix rev C: shack interface
PE1RGU
160 × 161 mm265 parts4LCERN-OHL-S-2.02STM32
Sensor module
HasiKe
120 × 64 mm136 parts2LNo license0STM32
MCU Prototype
pawel-dzialo
71.5 × 69.5 mm30 parts4LNo license0QSIC Prototype 2
dabridgham
214.1 × 131.8 mm71 parts4LNo license11ESP8266
Esp8266
tuankiet65
36.8 × 41.3 mm14 parts2LNo license0
How designs wire the LD1117S33CTR
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the LD1117S33CTR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 21 of 32 designs, most often 100 nF (then 10 µF).
- The VOUT pins have a decoupling capacitor on 19 of 32 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 97% | — |
| VOUTpin 2, 4 | Connected to: 3.3V 63% · not connected 27% |
|
| VINpin 3 | Connected to: 5V 81% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Diy projector clock by shufps, DingoPDM by corygrant, 4chord midi by sgreg and IBus BT digital module by the-vty.
The LD1117S33CTR in open source designs
The gallery holds 37 open source boards using the LD1117S33CTR from 33 GitHub repositories; a typical one measures about 84.6 × 85.3 mm and carries around 71 components.
76% are two-layer designs, the rest use four layers or more, and 24% carry an open source license.
The most starred is Diy projector clock by shufps.
Parts used alongside the LD1117S33CTR
Microcontrollers on boards using the LD1117S33CTR
What boards using the LD1117S33CTR are built for
LD1117S33CTR: common questions
Where can I find a LD1117S33CTR reference design?
Each of the 37 boards on this page is a real design using the LD1117S33CTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117S33CTR VIN pin?
The VIN pin has a decoupling capacitor on 21 of 32 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the LD1117S33CTR.
What decoupling capacitors do designs use on the LD1117S33CTR VOUT pin?
The VOUT pins have a decoupling capacitor on 19 of 32 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 32 open source designs using the LD1117S33CTR.
What parts are used alongside the LD1117S33CTR?
The ESP-12E, 74HC595, ADuM1200AR, ATmega328P-A and BLUENRG-M0A appear in the most repositories here.
Which microcontrollers do boards using the LD1117S33CTR use?
Most are built on STM32 (12), ESP8266 (6), ESP32 (3) and Silicon Labs (2).
How big is a typical board using the LD1117S33CTR?
The median is 84.6 × 85.3 mm, and 76% are two-layer designs.
What is the most popular open source board using the LD1117S33CTR?
By GitHub stars, Diy projector clock by shufps, with 168 stars.
Can I simulate one of these boards using the LD1117S33CTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.