HardLabs

Logitech Pedal Shield for Pro Micro

dmadison·Sim-Racing-Shields·pcbs/Logitech_Pedal_Shield_Pro_Micro/Logitech_Pedal_Shield_Pro_Micro.kicad_pcb

Logitech Pedal Shield for Pro Micro layout, top view — open source board by dmadison
Simulate this board

About the Logitech Pedal Shield for Pro Micro

Logitech Pedal Shield for Pro Micro is an open source PCB design by dmadison, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 31.2 × 48.1 mm, with 6 components from 4 distinct parts.

Other key parts include the DEV-15795. By type, the board carries 3 jumpers, 1 IC, 1 connector and 1 resistor.

It belongs with the dev boards & breakouts and audio designs in this gallery.

From the project

Add-on circuit boards ("shields") for connecting Arduino development boards to sim racing equipment.

This repo contains add-on circuit boards ("shields") for connecting Arduino development boards to sim racing equipment. These shields are meant to be used in conjunction with the Sim Racing Library for Arduino. These shields can be used to create inexpensive, standalone USB HID adapters for use with racing games and simulators.

Both of these shields are designed to be used with a SparkFun Pro Micro, 5V (32U4). You can use either genuine SparkFun boards or 3rd party clones. The SparkFun Qwiic Pro Micro with a USB-C port (DEV-15795) is recommended. The SparkFun Pro Micro RP2040 is…

Main components on the Logitech Pedal Shield for Pro Micro

DEV-15795

Logitech Pedal Shield for Pro Micro bill of materials (BOM)

6 components, 4 distinct parts.

QtyPartRefs
1
DEV-15795
SparkFun_ProMicro
SparkFun Electronics
U1
1
AVR-ISP-6
J2
3
Jumper_2_Open
JP4, JP5, JP6
1
RC0805FR-0710KP
10k
YAGEO
R1

Logitech Pedal Shield for Pro Micro design files

The KiCad project lives in the dmadison/Sim-Racing-Shields repository on GitHub; these links point at the commit this page was built from.

Logitech Pedal Shield for Pro Micro: common questions

How big is the Logitech Pedal Shield for Pro Micro?

The Logitech Pedal Shield for Pro Micro measures 31.2 × 48.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Logitech Pedal Shield for Pro Micro?

6 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Logitech Pedal Shield for Pro Micro design files?

From the dmadison/Sim-Racing-Shields repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Logitech Pedal Shield for Pro Micro design in my own project?

Yes, under the terms of its GPL-3.0 license, which dmadison chose for the repository.

More boards in Sim-Racing-Shields

Similar boards