Senior-Design-Dog-Collar

dmanojlovic·Senior-Design-Dog-Collar·PCB/PCB.kicad_pcb

Senior-Design-Dog-Collar PCB layout, top view — open source STM32 board by dmanojlovic

About the Senior-Design-Dog-Collar PCB

Senior-Design-Dog-Collar is an open source STM32 PCB design by dmanojlovic, published on GitHub. It is a 2-layer board measuring 64.8 × 61 mm, with 48 components from 30 distinct parts.

Its main chip is the STM32L476RGTx, from the STM32 family. Other key parts include the FGPMMOPA6H, TPS63001DRCR, LM2735XMF/NOPB, LM386 and MAX7375AXR805. By type, the board carries 20 capacitors, 9 resistors, 7 ICs, 6 diodes, 3 connectors and 2 inductors.

Main components on the Senior-Design-Dog-Collar

Senior-Design-Dog-Collar bill of materials (BOM)

48 components, 30 distinct parts.

QtyPartRefs
1
STM32L476RGTx
U1
1
FGPMMOPA6H
U2
1
~
U3
1
TPS63001DRCR
U4
1
LM2735XMF/NOPB
U5
1
LM386
U8
1
MAX7375AXR805
U9
2
Conn_01x02_Pin
J2, J3
1
Conn_01x04_Pin
J5
1
SW_Push
SW1
2
320 mV, 2A
D1, D3
4
LED
D2, D4, D5, D6
1
3.3 uH, 20 mOhms
L1
1
3.3 uH, 20 Ohm
L2
1
10 uF, 1mOhms
C1
1
47 uF, 2.94 mOhms
C2
1
10 uF, 3 mOhms
C3
1
1.8 nF
C4
1
22 uF, 1 mOhms
C5
2
100 uF
C6, C9
Show 10 more
QtyPartRefs
2
.1 uF
C7, C8
7
.1 uF
C10, C11, C13, C14, C18, C19, C20
1
100 uF
C12
1
4.7 uF
C15
1
.01 uF
C16
1
1 uF
C17
2
10k Ohms
R1, R2
1
30k Ohms
R3
4
1K Ohms
R6, R7, R8, R9
2
100k Ohms
R10, R11

Senior-Design-Dog-Collar design files

The KiCad project lives in the dmanojlovic/Senior-Design-Dog-Collar repository on GitHub; these links point at the commit this page was built from.

Senior-Design-Dog-Collar: common questions

What microcontroller does the Senior-Design-Dog-Collar use?

The Senior-Design-Dog-Collar is built around the STM32L476RGTx, from the STM32 family.

How big is the Senior-Design-Dog-Collar PCB?

The Senior-Design-Dog-Collar measures 64.8 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Senior-Design-Dog-Collar?

48 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Senior-Design-Dog-Collar design files?

From the dmanojlovic/Senior-Design-Dog-Collar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Senior-Design-Dog-Collar design in my own project?

The repository has no license, so all rights stay with dmanojlovic. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Senior-Design-Dog-Collar without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards