LED PUSH BUTTON ADAPTER BOARD

dmitry-lif·kb-e2b6·hardware/button_db/button_db.kicad_pcb

LED PUSH BUTTON ADAPTER BOARD layout, top view — open source board by dmitry-lif

About the LED PUSH BUTTON ADAPTER BOARD

LED PUSH BUTTON ADAPTER BOARD is an open source PCB design by dmitry-lif, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 19.3 × 10.1 mm, with 5 components from 3 distinct parts.

It belongs with the keyboards designs in this gallery.

From the project

Small USB controller for backlit rotary encoders and push buttons, seen by the host as a keyboard

KB-E2B6 is a small (45 × 35 mm) open-source controller for physical controls. You connect up to two rotary encoders with push switches and six push buttons, all of them backlit if you like, and run one USB cable to the host. The host sees an ordinary USB keyboard. You choose once, in a web page (the configurator), what each control sends, and the controller remembers this setup.

LED PUSH BUTTON ADAPTER BOARD, from the project README
From the project README

LED PUSH BUTTON ADAPTER BOARD bill of materials (BOM)

5 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
C51940118
Conn_01x04
B1, B2
2
C22797
13K
R1, R3
1
C23212
6K8
R2

LED PUSH BUTTON ADAPTER BOARD design files

The KiCad project lives in the dmitry-lif/kb-e2b6 repository on GitHub; these links point at the commit this page was built from.

LED PUSH BUTTON ADAPTER BOARD: common questions

How big is the LED PUSH BUTTON ADAPTER BOARD?

The LED PUSH BUTTON ADAPTER BOARD measures 19.3 × 10.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LED PUSH BUTTON ADAPTER BOARD?

5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LED PUSH BUTTON ADAPTER BOARD design files?

From the dmitry-lif/kb-e2b6 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LED PUSH BUTTON ADAPTER BOARD design in my own project?

Yes, under the terms of its Apache-2.0 license, which dmitry-lif chose for the repository.

More boards in kb-e2b6

Similar boards