LED RGB ENCODER SWITCH ADAPTER BOARD
dmitry-lif·kb-e2b6·hardware/encoder_rgb_db/encoder_rgb_db.kicad_pcb
About the LED RGB ENCODER SWITCH ADAPTER BOARD
LED RGB ENCODER SWITCH ADAPTER BOARD is an open source PCB design by dmitry-lif, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 24.3 × 15.7 mm, with 6 components from 5 distinct parts.
By type, the board carries 4 resistors, 1 transistor and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
Small USB controller for backlit rotary encoders and push buttons, seen by the host as a keyboard
KB-E2B6 is a small (45 × 35 mm) open-source controller for physical controls. You connect up to two rotary encoders with push switches and six push buttons, all of them backlit if you like, and run one USB cable to the host. The host sees an ordinary USB keyboard. You choose once, in a web page (the configurator), what each control sends, and the controller remembers this setup.

LED RGB ENCODER SWITCH ADAPTER BOARD bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C15127 AO3401A | SOT-23 | Q1 |
| 1 | C51940119 Conn_01x06 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1 |
| 2 | C23025 300R | R_0603_1608Metric | R1, R3 |
| 1 | C22808 150R | R_0603_1608Metric | R2 |
| 1 | C25744 10K | R_0402_1005Metric | R4 |
LED RGB ENCODER SWITCH ADAPTER BOARD design files
The KiCad project lives in the dmitry-lif/kb-e2b6 repository on GitHub; these links point at the commit this page was built from.
LED RGB ENCODER SWITCH ADAPTER BOARD: common questions
How big is the LED RGB ENCODER SWITCH ADAPTER BOARD?
The LED RGB ENCODER SWITCH ADAPTER BOARD measures 24.3 × 15.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED RGB ENCODER SWITCH ADAPTER BOARD?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LED RGB ENCODER SWITCH ADAPTER BOARD design files?
From the dmitry-lif/kb-e2b6 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LED RGB ENCODER SWITCH ADAPTER BOARD design in my own project?
Yes, under the terms of its Apache-2.0 license, which dmitry-lif chose for the repository.