KB-E2B6 / USB HID CONTROL INTERFACE
dmitry-lif·kb-e2b6·hardware/kb_e2b6_hw_v2.kicad_pcb
About the KB-E2B6 / USB HID CONTROL INTERFACE PCB
KB-E2B6 / USB HID CONTROL INTERFACE is an open source STM32 PCB design by dmitry-lif, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 45 × 35 mm, with 68 components from 21 distinct parts.
Its main chip is the C5270356, from the STM32 family. Other key parts include the C83508 and C55266. By type, the board carries 19 resistors, 18 capacitors, 16 diodes, 3 ICs, 1 transistor and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
Small USB controller for backlit rotary encoders and push buttons, seen by the host as a keyboard
KB-E2B6 is a small (45 × 35 mm) open-source controller for physical controls. You connect up to two rotary encoders with push switches and six push buttons, all of them backlit if you like, and run one USB cable to the host. The host sees an ordinary USB keyboard. You choose once, in a web page (the configurator), what each control sends, and the controller remembers this setup.

Main components on the KB-E2B6 / USB HID CONTROL INTERFACE
KB-E2B6 / USB HID CONTROL INTERFACE bill of materials (BOM)
68 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C5270356 STM32G474CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | C83508 ME6209A33M3G | SOT-23-3 | U2 |
| 1 | C55266 TPS2553DBVR | SOT-23-6 | U3 |
| 1 | C20917 AO3400A | SOT-23 | Q1 |
| 1 | C165948 TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 6 | C51940118 Conn_01x04 | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | B1, B2, B3, B4, B5, B6 |
| 2 | C51940119 Conn_01x06 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | E1, E2 |
| 1 | C720477 TS-1088-AR02016 | SW_SPST_TS-1088-xR020 | SW1 |
| 2 | C20615786 H5VU10BB | D_SOD-882 | D1, D2 |
| 1 | C20617910 H4S5N10B | D_SOD-882 | D3 |
| 12 | C20615782 H3V3U10B | D_SOD-882 | D4, D5, D6, D7, D8, D9, D10, D11 +4 |
| 1 | C2286 KT-0603R | LED_0603_1608Metric | D16 |
| 1 | C14709 BLM18PG121SN1D | L_0603_1608Metric | FB1 |
| 11 | C1525 100nF | C_0402_1005Metric | C1, C2, C3, C4, C6, C9, C11, C13 +3 |
| 3 | C52923 1uF | C_0402_1005Metric | C5, C7, C8 |
| 4 | C96446 10uf | C_0603_1608Metric | C10, C12, C15, C18 |
| 1 | C25744 10K | R_0402_1005Metric | R1 |
| 3 | C25905 5K1 | R_0402_1005Metric | R3, R4, R20 |
| 1 | C25764 200K | R_0402_1005Metric | R5 |
| 13 | C25091 220R | R_0402_1005Metric | R6, R8, R9, R10, R11, R12, R13, R14 +5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C25741 100K | R_0402_1005Metric | R7 |
KB-E2B6 / USB HID CONTROL INTERFACE design files
The KiCad project lives in the dmitry-lif/kb-e2b6 repository on GitHub; these links point at the commit this page was built from.
KB-E2B6 / USB HID CONTROL INTERFACE: common questions
What microcontroller does the KB-E2B6 / USB HID CONTROL INTERFACE use?
The KB-E2B6 / USB HID CONTROL INTERFACE is built around the C5270356, from the STM32 family.
How big is the KB-E2B6 / USB HID CONTROL INTERFACE PCB?
The KB-E2B6 / USB HID CONTROL INTERFACE measures 45 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KB-E2B6 / USB HID CONTROL INTERFACE?
68 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KB-E2B6 / USB HID CONTROL INTERFACE design files?
From the dmitry-lif/kb-e2b6 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KB-E2B6 / USB HID CONTROL INTERFACE design in my own project?
Yes, under the terms of its Apache-2.0 license, which dmitry-lif chose for the repository.
Can I test firmware for the KB-E2B6 / USB HID CONTROL INTERFACE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in kb-e2b6
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k