HardLabs

Our keeb

Dogecoin17·our-keeb

Our keeb PCB layout, top view — open source RP2040/RP2350 board by Dogecoin17

About the Our keeb PCB

Our keeb is an open source RP2040/RP2350 PCB design by Dogecoin17, published on GitHub. It is a 2-layer board measuring 388.1 × 102.2 mm, with 148 components from 7 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 76 switches, 71 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

(if you're interested in our work check out the issues, where we documented our "journey" with photos)

Main components on the Our keeb

RaspberryPi_Pico

Our keeb bill of materials (BOM)

148 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
71
~
S1, S2, S3, S4, S5, S6, S7, S8 +63
1
MX_stab
S54
2
MX_stab
S55, S56
1
MX_stab
S57
1
RotaryEncoder
SW1
71
~
D1, D2, D3, D4, D5, D6, D7, D8 +63

Our keeb design files

The KiCad project lives in the Dogecoin17/our-keeb repository on GitHub; these links point at the commit this page was built from.

Our keeb: common questions

What microcontroller does the Our keeb use?

The Our keeb is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Our keeb PCB?

The Our keeb measures 388.1 × 102.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Our keeb?

148 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Our keeb design files?

From the Dogecoin17/our-keeb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Our keeb design in my own project?

The repository has no license, so all rights stay with Dogecoin17. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Our keeb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards