Nxp mcxn947-datalogger
Doly02·nxp-mcxn947-datalogger·hardware/extension_shield/extension_shield.kicad_pcb
About the Nxp mcxn947-datalogger PCB
Nxp mcxn947-datalogger is an open source PCB design by Doly02, published on GitHub. It is a 2-layer board measuring 118.1 × 55 mm, with 38 components from 17 distinct parts.
Other key parts include the DS3231M and NEO-7M-MODULE. By type, the board carries 18 resistors, 7 connectors, 5 transistors, 3 capacitors, 2 ICs and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Bachelor's Thesis - Digital Data Logger with Information Loss Prevention in Case of Power Failure
This folder contains all hardware-related materials for the expansion shield designed for the FRDM-MCXN947 development board used in data logger project.
- expansionshield/ – Contains the full KiCad 8 project of the expansion board. This includes the schematic, PCB layout, and associated design files. - BOM.csv – A standard bill of materials generated from KiCad 8 listing the components used on the expansion board. - component.txt – A human-readable version of the BOM, listing key components along with direct links to online distributors for easy purchasing. Note: This list does not include…
Main components on the Nxp mcxn947-datalogger
Nxp mcxn947-datalogger bill of materials (BOM)
38 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | NEO-7M-MODULE | Neo-7M-Module | U2 |
| 5 | BC546 | TO-92_Inline | Q1, Q2, Q3, Q4, Q5 |
| 2 | SSQ-108-03-T-D | SAMTEC_SSQ-108-XX-X-D | J1, J3 |
| 1 | SSQ-110-03-T-D | SAMTEC_SSQ-110-03-T-D | J2 |
| 1 | SSQ-106-03-T-D | SAMTEC_SSQ-106-03-T-D | J4 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | J5 |
| 1 | SSQ-114-03-T-D | SAMTEC_SSQ-114-03-T-D | J8 |
| 1 | SSQ-116-03-T-D | SAMTEC_SSQ-116-XX-X-D | J9 |
| 1 | RTC_Battery | Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles | BT1 |
| 2 | RSX301L | D_SMA | D1, D2 |
| 2 | 0.33F | C_Radial_D8mm_W24mm_L14mm_P13.5mm | C1, C2 |
| 1 | 100N 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 2 | 10R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R18 |
| 1 | 18K 18k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 33K 33k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 14 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11 +6 |
Nxp mcxn947-datalogger design files
The KiCad project lives in the Doly02/nxp-mcxn947-datalogger repository on GitHub; these links point at the commit this page was built from.
Nxp mcxn947-datalogger: common questions
How big is the Nxp mcxn947-datalogger PCB?
The Nxp mcxn947-datalogger measures 118.1 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nxp mcxn947-datalogger?
38 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nxp mcxn947-datalogger design files?
From the Doly02/nxp-mcxn947-datalogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Nxp mcxn947-datalogger design in my own project?
The repository has no license, so all rights stay with Doly02. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979