CR-TEST main board

dophuthinh2010-crypto·kit-contact-resistance-16pin·hardware/kicad/crkit_main/crkit_main.kicad_pcb

CR-TEST main board layout, top view — open source ESP32 board by dophuthinh2010-crypto

About the CR-TEST main board

CR-TEST main board is an open source ESP32 PCB design by dophuthinh2010-crypto, published on GitHub. It is a 2-layer board measuring 135 × 90 mm, with 182 components from 46 distinct parts.

Its main chip is the Espressif ESP32-DevKitC-32E on 2x 1x19 sockets, from the ESP32 family. Other key parts include the Diodes AP2112K-3.3TRG1, Allegro ACS712ELCTR-05B-T, TI SN74HC595DR, TI CD74HC4067M96 and TI INA333AIDGKR. By type, the board carries 85 resistors, 36 diodes, 19 transistors, 19 capacitors, 10 ICs and 6 test points.

From the project

Test kit to measure contact resistance of 16-pin McMurdo RP16 connector over plug/unplug cycles

All files are written by hardware/scripts/kicadgen/buildall.py (KiCad 8 format). The design lives in the scripts: mainboard.py (netlist + placement), jackboard.py, lib.py (symbols and footprints). To change the design, edit the script and run python buildall.py`, or open the files in KiCad and keep editing there (then stop regenerating, or your KiCad edits will be overwritten).

CR-TEST main board, from the project README
From the project README

Main components on the CR-TEST main board

Diodes AP2112K-3.3TRG1Allegro ACS712ELCTR-05B-TTI SN74HC595DRTI CD74HC4067M96TI INA333AIDGKRTI OPA333AIDBVRTI ADS1115IDGSREspressif ESP32-DevKitC-32E on 2x 1x19 sockets

CR-TEST main board bill of materials (BOM)

182 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Diodes AP2112K-3.3TRG1
AP2112K-3.3
U1
1
Allegro ACS712ELCTR-05B-T
ACS712-05B
U2
2
TI SN74HC595DR
74HC595
U3, U4
2
TI CD74HC4067M96
CD74HC4067
U5, U6
1
TI INA333AIDGKR
INA333
U7
1
TI OPA333AIDBVR
OPA333
U8
1
TI ADS1115IDGSR
ADS1115
U9
1
Espressif ESP32-DevKitC-32E on 2x 1x19 sockets
ESP32-DevKitC-32E
U10
2
AOS AO3401A
AO3401A
Q1, Q3
1
2N7002
Q2
16
AOS AO3400A
AO3400A
Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 +8
1
CUI PJ-002A
5V 2A barrel
J1
1
Amphenol T821134A1S100CEU
Female jack board
J2
1
Amphenol T821134A1S100CEU
Male jack board
J3
1
JST B2B-XH-A
Mate switch
J4
1
2.54 mm header
I2C spare
J5
1
Bourns MF-MSMF200-2
2A hold
F1
1
2.54 mm header + jumper
Gain 101 | 11
JP1
1
GND
TP1
1
I_SENSE
TP2
Show 26 more
QtyPartRefs
1
LO_RTN
TP3
1
INA_REF
TP4
1
V_CONTACT
TP5
1
F_BUS
TP6
1
Diodes BZT52C5V1
BZT52C5V1
D1
1
Littelfuse SMBJ5.0A
SMBJ5.0A
D2
33
Nexperia BAT54S
BAT54S
D3, D4, D5, D6, D7, D8, D9, D10 +25
1
0805 green LED
green
D36
1
Panasonic EEU-FR1A471
470u 10V
C1
1
Samsung CL21 X7R
1u
C2
1
Samsung CL21 X5R
10u
C3
12
Samsung CL10 X7R
100n
C4, C6, C7, C8, C9, C13, C14, C15 +4
1
Samsung CL10 X7R
1n
C5
2
Samsung CL10 C0G
100p C0G
C10, C11
1
Samsung CL10 X7R
10n
C12
41
UNI-ROYAL 0603WAF
10k
R1, R3, R39, R40, R41, R42, R43, R44 +33
17
UNI-ROYAL 0603WAF
100k
R2, R8, R10, R12, R14, R16, R18, R20 +9
1
Yageo SQP10AJB-5R6
5.6R 10W
R4
3
UNI-ROYAL 0603WAF
1k
R5, R78, R85
1
Yageo SQP500JB-2R2
2.2R 5W
R6
16
UNI-ROYAL 0603WAF
100
R7, R9, R11, R13, R15, R17, R19, R21 +8
1
UNI-ROYAL 0603WAF
3.3k
R71
1
Yageo RT0603BRD071KL
1.00k 0.1%
R73
1
Yageo RT0603BRD0710KL
10.0k 0.1%
R74
1
UNI-ROYAL 0603WAF
120k
R75
2
UNI-ROYAL 0603WAF
4.7k
R79, R80

CR-TEST main board design files

The KiCad project lives in the dophuthinh2010-crypto/kit-contact-resistance-16pin repository on GitHub; these links point at the commit this page was built from.

CR-TEST main board: common questions

What microcontroller does the CR-TEST main board use?

The CR-TEST main board is built around the Espressif ESP32-DevKitC-32E on 2x 1x19 sockets, from the ESP32 family.

How big is the CR-TEST main board?

The CR-TEST main board measures 135 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CR-TEST main board?

182 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CR-TEST main board design files?

From the dophuthinh2010-crypto/kit-contact-resistance-16pin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CR-TEST main board design in my own project?

The repository has no license, so all rights stay with dophuthinh2010-crypto. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CR-TEST main board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards