5 open source boards using the TLV75518PDRV
Real designs built with the TLV75518PDRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
2.5in-IDE-SSD-no lengthmatch
dosdude1
65 × 49.8 mm82 parts4LGPL-3.0332RP2040/RP2350
PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202Zif ide ssd
dosdude1
49 × 68.5 mm79 parts4LGPL-3.096Audioboard
Keyaan-07
17 × 33 mm17 parts2LNo license0STM32
Benchy2 Motherboard
Daxxn
159.5 × 105 mm951 parts8LAGPL-3.02
How designs wire the TLV75518PDRV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV75518PDRV connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 4.7 µF).
- The OUT pin is tied to VCCFQ on 3 of 5 designs (a signal on 2).
- The IN pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
- The EN pin has a pull-up to 3.3V on 2 of 5 designs, most often 0 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: VCCFQ 60% · a signal 40% | — |
| NCpin 2, 5 | Connected to: Not connected 100% | — |
| GNDpin 3, 7 | Connected to: GND 100% | — |
| ENpin 4 | Connected to: Signal 60% · 3.3V 40% |
|
| INpin 6 | Connected to: 3.3V 60% · a signal 40% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2.5in-IDE-SSD-no lengthmatch by dosdude1, PS2 AIO Mainboard by tschicki, Zif ide ssd by dosdude1 and Benchy2 Motherboard by Daxxn.
The TLV75518PDRV in open source designs
The gallery holds 5 open source boards using the TLV75518PDRV from 5 GitHub repositories; a typical one measures about 65 × 68.5 mm and carries around 82 components.
80% use four copper layers or more, and 80% carry an open source license.
The most starred is 2.5in-IDE-SSD-no lengthmatch by dosdude1.
Parts used alongside the TLV75518PDRV
Microcontrollers on boards using the TLV75518PDRV
What boards using the TLV75518PDRV are built for
TLV75518PDRV: common questions
Where can I find a TLV75518PDRV reference design?
Each of the 5 boards on this page is a real design using the TLV75518PDRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75518PDRV EN pin connected?
The EN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the TLV75518PDRV.
How is the TLV75518PDRV OUT pin connected?
The OUT pin is tied to VCCFQ on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TLV75518PDRV.
How is the TLV75518PDRV IN pin connected?
The IN pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TLV75518PDRV.
Which microcontrollers do boards using the TLV75518PDRV use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TLV75518PDRV?
The median is 65 × 68.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the TLV75518PDRV?
By GitHub stars, 2.5in-IDE-SSD-no lengthmatch by dosdude1, with 332 stars.
Can I simulate one of these boards using the TLV75518PDRV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.