15 open source boards using the TLV75533PDRV

Real designs built with the TLV75533PDRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the TLV75533PDRV

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV75533PDRV connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 3.3V on 10 of 11 designs.
  • The IN pin is tied to 5V on 9 of 11 designs (a signal on 2).
  • The EN pin is tied to 5V on 7 of 11 designs (a signal on 4).
OUTpin 1Connected to: 3.3V 91%
NCpin 2, 5Connected to: Not connected 100%
GNDpin 3, 7Connected to: GND 100%
ENpin 4Connected to: 5V 64% · a signal 36%
INpin 6Connected to: 5V 82% · a signal 18%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2.5in-IDE-SSD-no lengthmatch by dosdude1, HomeKey-ESP32-PCB by lollokara, TekTag BioSensor by teklabsdigital and ESPHome-Indoor-Multi-Sensor by mikelawrence.

The TLV75533PDRV in open source designs

The gallery holds 15 open source boards using the TLV75533PDRV from 11 GitHub repositories; a typical one measures about 50 × 43.3 mm and carries around 60 components.

53% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is 2.5in-IDE-SSD-no lengthmatch by dosdude1.

Parts used alongside the TLV75533PDRV

Microcontrollers on boards using the TLV75533PDRV

TLV75533PDRV: common questions

Where can I find a TLV75533PDRV reference design?

Each of the 15 boards on this page is a real design using the TLV75533PDRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75533PDRV OUT pin connected?

The OUT pin is tied to 3.3V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV75533PDRV.

How is the TLV75533PDRV IN pin connected?

The IN pin is tied to 5V on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the TLV75533PDRV.

How is the TLV75533PDRV EN pin connected?

The EN pin is tied to 5V on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the TLV75533PDRV.

Which microcontrollers do boards using the TLV75533PDRV use?

Most are built on ESP32 (3), STM32 (3) and FPGA (2).

How big is a typical board using the TLV75533PDRV?

The median is 50 × 43.3 mm, and 53% are two-layer designs.

What is the most popular open source board using the TLV75533PDRV?

By GitHub stars, 2.5in-IDE-SSD-no lengthmatch by dosdude1, with 332 stars.

Can I simulate one of these boards using the TLV75533PDRV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part