Tinypulse-412
draarivpatel-ui·tinypulse-412·hardware/tinypulse-412.kicad_pcb
About the Tinypulse-412 PCB
Tinypulse-412 is an open source AVR/Arduino PCB design by draarivpatel-ui, published on GitHub under the MIT license. It is a 2-layer board measuring 38 × 25 mm, with 14 components from 12 distinct parts.
Its main chip is the ATTINY412-SSNR, from the AVR/Arduino family. By type, the board carries 4 resistors, 2 connectors, 2 switches, 2 diodes, 1 IC and 1 battery holder.
It belongs with the audio and displays & leds designs in this gallery.
From the project
TinyPulse-412: ATtiny412-SSNR 8-Pin Pocket Chiptune Synth & BPM Metronome PCB (KiCad 8, OSH Park After Dark & PCBWay Gerbers, DigiKey BOM, UPDI Firmware)
Live Interactive PCB Layout & ATtiny412 Hardware Simulator: https://aariv.me/tinypulse-412/ MCU: Microchip ATtiny412-SSNR (SOIC-8, 20 MHz, 4 KB Flash, 256 B SRAM, Single-Wire UPDI) Board Size: 38.0 mm x 25.0 mm (1.50 in x 0.98 in = 1.47 sq in) Total Cost (3 Complete Boards): $24.15 USD ($7.35 OSH Park 2-Layer / After Dark PCB + $16.80 DigiKey Components, under the $35.00 Hack Club 8-Pin Grant limit)
Main components on the Tinypulse-412
Tinypulse-412 bill of materials (BOM)
14 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY412-SSNR ATtiny412-SSNR Microchip Technology | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PRPC003SAAN-RC UPDI_3P Sullins Connector Solutions | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | PRPC004SAAN-RC OLED_I2C Sullins Connector Solutions | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BS-7 BS-7_CR2032 Memory Protection Devices | BatteryHolder_Keystone_3000_1x12mm | BT1 |
| 1 | ABI-009-RC PIEZO_9MM Pro Signal / Mallory | MagneticBuzzer_ProSignal_ABI-009-RC | BZ1 |
| 1 | PTS645SM43SMTR92LFS BTN_PITCH C&K | SW_SPST_PTS645 | SW1 |
| 1 | PTS645SM43SMTR92LFS BTN_TEMPO C&K | SW_SPST_PTS645 | SW2 |
| 1 | LTST-C170KRKT BEAT_LED Lite-On Inc. | LED_0805_2012Metric | D1 |
| 1 | LTST-C170KRKT SYNTH_LED Lite-On Inc. | LED_0805_2012Metric | D2 |
| 1 | CL21B104KBCNNNC 100nF Samsung Electro-Mechanics | C_0805_2012Metric | C1 |
| 2 | RC0805FR-074K7L 4.7k YAGEO | R_0805_2012Metric | R1, R2 |
| 2 | RC0805FR-07330RL 330R YAGEO | R_0805_2012Metric | R3, R4 |
Tinypulse-412 design files
The KiCad project lives in the draarivpatel-ui/tinypulse-412 repository on GitHub; these links point at the commit this page was built from.
Tinypulse-412: common questions
What microcontroller does the Tinypulse-412 use?
The Tinypulse-412 is built around the ATTINY412-SSNR, from the AVR/Arduino family.
How big is the Tinypulse-412 PCB?
The Tinypulse-412 measures 38 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tinypulse-412?
14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tinypulse-412 design files?
From the draarivpatel-ui/tinypulse-412 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tinypulse-412 design in my own project?
Yes, under the terms of its MIT license, which draarivpatel-ui chose for the repository.
Can I test firmware for the Tinypulse-412 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k