LL10G Cyclone10GX 1
drandyhaas·LL10G_Cyclone10GX_1·fmcboard_kicad/fmcboard_v1.7/fmcboard_v1.7.kicad_pcb
About the LL10G Cyclone10GX 1 PCB
LL10G Cyclone10GX 1 is an open source PCB design by drandyhaas, published on GitHub. It is a 4-layer board measuring 127 × 74 mm, with 306 components from 42 distinct parts.
Other key parts include the OPA699ID, DAC7578SPWR, LTC6229IMS8E#TRPBF, OPA695IDR and LM358. By type, the board carries 121 capacitors, 118 resistors, 40 ICs, 7 connectors, 4 inductors and 2 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
Test of 10 Gb ethernet output from Cyclone 10 GX dev kit
Test of 10 Gb ethernet output from Cyclone 10 GX dev kit
All switches up (OFF, 1) except S32 (and S21) For FMC JTAG not in use, set S5_1 to 0
Program with .sof (via .cdf to open programmer) Runs for unlimited time, but can't program permanently See heartbeat LED Reset Arduino with softi2ccyclone10gx to program SFP outputs (level shifted to 1.8 V) See red, then green, SFP LEDs Open system console
Main components on the LL10G Cyclone10GX 1
LL10G Cyclone10GX 1 bill of materials (BOM)
306 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA699ID | SOIC127P600X175-8N | IC1, IC7 |
| 2 | DAC7578SPWR | SOP65P640X120-16N | IC2, IC16 |
| 4 | LTC6229IMS8E#TRPBF | SOP65P490X110-9N | IC3, IC5, IC33, IC38 |
| 2 | OPA695IDR | SOIC127P600X175-8N | IC4, IC6 |
| 4 | LM358 | SO08_520 | IC8, IC9, IC10, IC27 |
| 1 | 7805DT | TO252 | IC11 |
| 12 | SN74AUC2G66DCTR | SOP65P400X130-8N | IC12, IC13, IC14, IC15, IC17, IC18, IC19, IC20 +4 |
| 6 | 74AUP2GU04GW | SOT65P210X110-6N | IC21, IC22, IC23, IC24, IC34, IC35 |
| 1 | MC7905ACD2TR4G | MC7905ACD2TR4G | IC25 |
| 1 | AMS1117-1.8 | SOT223_111 | IC26 |
| 1 | LM337KVURG3 | LM337KVURG3 | IC29 |
| 2 | TPS5430DDAR | SOIC127P600X170-9N | IC36, IC37 |
| 2 | N-CHANNEL-MOSFET-BSS138 | SOT23-3 | U$1, U$2 |
| 5 | 4p-2.54 | H4-2.54_478 | J1, J4, J5, J6, J13 |
| 1 | ASP-134604-01 | ASP13460401 | J2 |
| 1 | 2X4P-2.54 | H2X4-2.54_478 | J3 |
| 8 | BU-SMB-V | BU-SMB-V_133 | IO_C10, IO_H4, IO_H5, IO_H34, OPIN0, OPOUT2, PULSESOUT0, PULSESOUT2 |
| 2 | 20 | FE20_161 | SV1, SV2 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
| 1 | — | dummyfp1 | UNK_HOLE_1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | dummyfp2 | UNK_HOLE_2 |
| 1 | — | dummyfp3 | UNK_HOLE_3 |
| 2 | B340A | SMA-DIODE_514 | D1, D2 |
| 2 | 10UH 10uH | 1210 | L1, L2 |
| 2 | 10UH 10uH | CDRH125 | L3, L4 |
| 12 | 10UF 10uF | C0805_334 | C1, C34, C38, C39, C41, C64, C77, C80 +4 |
| 2 | 100UF 100uF | VISHAY_C | C2, C40 |
| 65 | 0.1UF 0.1uF | 0402_CAP | C3, C4, C5, C6, C7, C9, C10, C13 +57 |
| 5 | 0.1UF 0.1uF | C0805K_334 | C8, C11, C12, C108, C113 |
| 18 | 1UF 1uF | 0402_CAP | C17, C18, C19, C20, C31, C56, C57, C58 +10 |
| 16 | 100PF 100pF | 0402_CAP | C32, C81, C82, C83, C84, C85, C87, C88 +8 |
| 2 | 0.01UF 0.01uF | 0402_CAP | C107, C122 |
| 1 | 2.2UF 2.2uF | EIA3216 | C125 |
| 13 | 470 | 0402_RES | R1, R7, R8, R12, R32, R33, R36, R38 +5 |
| 7 | 47 | 0402_RES | R2, R19, R20, R34, R70, R119, R120 |
| 8 | 10 | 0402_RES | R3, R13, R71, R72, R78, R86, R88, R89 |
| 4 | 50? | 0402_RES | R4, R5, R15, R16 |
| 25 | 1k | 0402_RES | R6, R11, R17, R18, R35, R60, R61, R62 +17 |
| 1 | 1?-3?k | R0805_334 | R9 |
| 22 | 100 | 0402_RES | R10, R14, R26, R42, R47, R53, R54, R55 +14 |
| 32 | 330 | 0402_RES | R21, R22, R23, R24, R25, R27, R28, R29 +24 |
| 6 | 10K 10k | 0402_RES | R48, R49, R50, R51, R73, R118 |
LL10G Cyclone10GX 1 design files
The KiCad project lives in the drandyhaas/LL10G_Cyclone10GX_1 repository on GitHub; these links point at the commit this page was built from.
LL10G Cyclone10GX 1: common questions
How big is the LL10G Cyclone10GX 1 PCB?
The LL10G Cyclone10GX 1 measures 127 × 74 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LL10G Cyclone10GX 1?
306 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LL10G Cyclone10GX 1 design files?
From the drandyhaas/LL10G_Cyclone10GX_1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LL10G Cyclone10GX 1 design in my own project?
The repository has no license, so all rights stay with drandyhaas. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389