Breadboard power supply
Draycole·breadboard-power-supply-pcb
About the Breadboard power supply PCB
Breadboard power supply is an open source PCB design by Draycole, published on GitHub under the MIT license. It is a 2-layer board measuring 35.3 × 53.3 mm, with 17 components from 13 distinct parts.
Other key parts include the LM7805_TO220 and LM317_TO-220. By type, the board carries 5 connectors, 3 switches, 3 capacitors, 3 resistors, 2 ICs and 1 diode.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
A breadboard power supply PCB that provides 5V and 3.3V using LM7805 and LM317 regulators. Features switch-selectable outputs, dual header rails for easy breadboard integration, and barrel jack input.
This project is a custom PCB that powers a breadboard with 5V and 3.3V rails. It’s designed for prototyping with microcontrollers, sensors, and other low-voltage circuits.
The board takes input through a standard barrel jack connector and uses two regulators: - LM7805 (TO-220) → Fixed 5V output - LM317 (TO-220) → Set up for 3.3V output
Both voltages are available through dual header pins, so they can be placed directly onto both sides of a breadboard. Switches are added to select the active voltage for each rail.
Main components on the Breadboard power supply
Breadboard power supply bill of materials (BOM)
17 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J5, J6 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J7 |
| 2 | EG1218 | SW_EG1218 | S1, S2 |
| 1 | SW_Wuerth_450301014042 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 0u1 | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 560 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
Breadboard power supply design files
The KiCad project lives in the Draycole/breadboard-power-supply-pcb repository on GitHub; these links point at the commit this page was built from.
Breadboard power supply: common questions
How big is the Breadboard power supply PCB?
The Breadboard power supply measures 35.3 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard power supply?
17 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breadboard power supply design files?
From the Draycole/breadboard-power-supply-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breadboard power supply design in my own project?
Yes, under the terms of its MIT license, which Draycole chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k