LCD-DRIVER Rev D
DrYouu·putifrog-klipper·docs/hardware/OLINUXINO-master/HARDWARE/LCDs/LCD-DRIVER/Hardware revision D/LCD-DRIVER_Rev_D.kicad_pcb
About the LCD-DRIVER Rev D PCB
LCD-DRIVER Rev D is an open source PCB design by DrYouu, published on GitHub. It is a 2-layer board measuring 104 × 66 mm, with 134 components from 61 distinct parts.
Other key parts include the AR1021T-I_SS(SSOP-20), AT24C16C-SSHM-T(SOIC-8_150mil), AP3031KTR-G1(SOT23-6), NA(AP3031KTR-G1(SOT23-6)) and Opened. By type, the board carries 65 resistors, 27 capacitors, 9 diodes, 5 ICs, 3 inductors and 1 transformer.
It belongs with the displays & leds designs in this gallery.
From the project
LCD-DRIVER is a common LCD board used in some Olimex displays. It is important to notice that depending on the size of the display and the type of touschreen used the LCD_DRIVER board would be configured dirrently. Refer to the labes in the schematic and also refer to the bill of
LCD-DRIVER is a common LCD board used in some Olimex displays. It is important to notice that depending on the size of the display and the type of touschreen used the LCD_DRIVER board would be configured dirrently. Refer to the labes in the schematic and also refer to the bill of materials (BOM) for the different configurations.
List of boards using LCD-DRIVER as of 09.07.2025:
Main components on the LCD-DRIVER Rev D
LCD-DRIVER Rev D bill of materials (BOM)
134 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AR1021T-I_SS(SSOP-20) | SSOP-20W | U1 |
| 1 | AT24C16C-SSHM-T(SOIC-8_150mil) | SOIC-8_150mil | U2 |
| 1 | AP3031KTR-G1(SOT23-6) | SOT23-6 | U3 |
| 1 | NA(AP3031KTR-G1(SOT23-6)) | SOT23-6 | U4 |
| 1 | Opened | SJ | U/D_EN1 |
| 1 | 3.3V:Opened/5.0V:Closed | SJ_2_SMALL_23_TIED | 3.3V/5.0V1 |
| 1 | CTRL:Closed/EN:Opened | SJ_2_SMALL_23_TIED | CTRL/EN1 |
| 3 | IRLML6402(SOT23-3) | SOT23 | FET1, FET2, FET3 |
| 1 | LCD-4.3"(480x272_GFT043HA480272Y)+(FPV-WZA21-40-LF) | FPV-WZA21-40-LF | LCD-4,3in_DISP1 |
| 1 | NA(LCD-5”(CAPACITIVE_TS)+(FPV-WZB201-06-LF)) | FPV-WZB201-06-LF | LCD-5in_CTP1 |
| 1 | NA(LCD-5”(800x480_HDW050TN22)+(FPV-WZA21-40-LF)) | FPV-WZA21-40-LF | LCD-5in_DISP1 |
| 2 | NA(FPV-WZB201-06-LF) | FPV-WZB201-06-LF | LCD-7in_CTP1, LCD-10,1in_CTP1 |
| 1 | NA(LCD-7"(800x480_AT070TN92)+(FPV-WZA21-50-LF)) | FPV-WZA21-50-LF | LCD-7in_DISP1 |
| 1 | NA(LCD-7"(1024x600_CX700QIPS-CTP38)+(FPV-WZA21-50-LF)) | FPV-WZA21-50-LF | LCD-7in_DISP2 |
| 1 | NA(LCD-TS7(LCD-7"_TOUCHPANEL)+(FPA-WZB25-04-LF)) | FPA-WZB25-04-LF | LCD-7in_RTP1 |
| 1 | NA(LCD-10"(1024x600_LOYE_BOE10.1-33LEDH)+(FPV-WZA21-50-LF)) | FPV-WZA21-50-LF | LCD-10,1in_DISP1 |
| 1 | NA(LCD-10"_CAP_TS(1024x600_IPS_CXT101H39-42E)+(FPV-WZA21-50-LF)) | FPV-WZA21-50-LF | LCD-10,1in_DISP2 |
| 1 | NA(LCD-TS10(LCD-10"_TOUCHPANEL)+(FPA-WZB25-04-LF)) | FPA-WZB25-04-LF | LCD-10,1in_RTP1 |
| 1 | P-B-V-40-LF | GBH254SMT-40 | LCD_CON1 |
| 1 | FPV-WZA21-40-LF | FPV-WZA21-40-LF | LCD_FLAT_CON1 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MALE-PAV16X-2x20(0.8_bud) | GPCB127SMT-02X20(YA-V36P-2X20-LF)_Drill_0.9mm | LCD_Lime1 |
| 1 | MALE-PAV16X-2x20(0.8_bud) | GPH127SMT-02X20(PA-V16X-2X20-LF)_Drill_0.9mm | LCD_Lime2 |
| 1 | NA(WU10S) | WU10S | PWR1 |
| 1 | PWRJ-2mm(DCJ-W54R-20-LF) | PWRJ-2mm(DCJ-W54R-20-LF) | PWR_JACK1 |
| 1 | DTC114YKA(SOT-23) | SOT23 | T1 |
| 2 | Closed | SJ_Closed | VLED+_E1, VLED-_E1 |
| 1 | NA(BZV55C3V9/SOD80C) | SOD80C-4148-KA | D1 |
| 1 | BAT54C(SOT23-3) | SOT23-3 | D2 |
| 1 | NA(BZV55C20/SOD80C) | SOD80C-4148-KA | D3 |
| 2 | NA(BAT54S(SOT23-3)) | SOT23-3 | D4, D6 |
| 2 | NA(1N5819S4(SOD-123)) | SOD-123_1C-2A_KA | D5, D9 |
| 1 | NA(BZV55C5V1/SOD80C) | SOD80C-4148-KA | D7 |
| 1 | 1N5819S4(SOD-123) | SOD-123_1C-2A_KA | D8 |
| 1 | 4.7uH/1.15A/DCR<0.1R/CD43 | CD42(43) | L1 |
| 1 | NA(4.7uH/1.15A/DCR<0.1R/CD43) | CD42(43) | L2 |
| 1 | Opened | SJ | L/R_EN1 |
| 6 | NA(22uF/6.3V/20%/X5R/C0603) | C_0603_5MIL_DWS | C1, C2, C5, C7, C8, C27 |
| 5 | 22uF/6.3V/20%/X5R/C0603 | C_0603_5MIL_DWS | C3, C11, C20, C21, C25 |
| 3 | NA(100nF/16V/10%/X7R/C0402) | C_0402_5MIL_DWS | C4, C6, C9 |
| 3 | 100nF/16V/10%/X7R/C0402 | C_0402_5MIL_DWS | C10, C14, C17 |
| 2 | 10nF/50V/10%/X7R/C0402 | C_0402_5MIL_DWS | C12, C13 |
| 6 | NA(100nF/50V/20%/Y5V/C0603) | C_0603_5MIL_DWS | C15, C18, C22, C23, C24, C26 |
| 1 | 2.2uF/50V/10%/X5R/C0805 | C_0805_5MIL_DWS | C16 |
| 1 | NA(2.2uF/50V/10%/X5R/C0805) | C_0805_5MIL_DWS | C19 |
| 12 | NA/R0402 | R_0402_5MIL_DWS | R1, R4, R5, R8, R12, R13, R17, R20 +4 |
| 20 | NA(10k/R0402) | R_0402_5MIL_DWS | R2, R3, R6, R7, R10, R11, R14, R18 +12 |
| 7 | 10k/R0402 | R_0402_5MIL_DWS | R9, R34, R42, R48, R63, R65, R66 |
| 2 | NA(1k/1%/R0402) | R_0402_5MIL_DWS | R15, R39 |
| 1 | NA(510R/1%/R0402) | R_0402_5MIL_DWS | R16 |
| 2 | 20k/1%/R0402 | R_0402_5MIL_DWS | R25, R43 |
| 5 | 2.2k/R0402 | R_0402_5MIL_DWS | R26, R27, R28, R29, R41 |
| 4 | NA(0R/R0402) | R_0402_5MIL_DWS | R30, R31, R32, R33 |
| 3 | NA(20k/1%/R0402) | R_0402_5MIL_DWS | R35, R37, R58 |
| 1 | 1k/1%/R0402 | R_0402_5MIL_DWS | R36 |
| 1 | 4.7R/1%/R0603 | R_0603_5MIL_DWS | R38 |
| 1 | NA/R0603 | R_0603_5MIL_DWS | R40 |
| 1 | NA(56.2k/1%/R0402) | R_0402_5MIL_DWS | R44 |
| 1 | NA(1.05k/1%/R0402) | R_0402_5MIL_DWS | R45 |
| 2 | 27k/R0402 | R_0402_5MIL_DWS | R46, R47 |
| 1 | NA(220R/0402) | R_0402_5MIL_DWS | R55 |
| 1 | 0R/R0402 | R_0402_5MIL_DWS | R61 |
LCD-DRIVER Rev D design files
The KiCad project lives in the DrYouu/putifrog-klipper repository on GitHub; these links point at the commit this page was built from.
LCD-DRIVER Rev D: common questions
How big is the LCD-DRIVER Rev D PCB?
The LCD-DRIVER Rev D measures 104 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LCD-DRIVER Rev D?
134 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the LCD-DRIVER Rev D design files?
From the DrYouu/putifrog-klipper repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LCD-DRIVER Rev D design in my own project?
The repository has no license, so all rights stay with DrYouu. Use it as a reference, and ask the author before reusing the design.
More boards in putifrog-klipper
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k