LCD-OLinuXino-5TS Rev.B
DrYouu·putifrog-klipper·docs/hardware/OLINUXINO-master/HARDWARE/LCDs/LCD-OLinuXino-5CTS/Hardware revision B/LCD-OLinuXino-5TS_Rev.B.kicad_pcb
About the LCD-OLinuXino-5TS Rev.B PCB
LCD-OLinuXino-5TS Rev.B is an open source PCB design by DrYouu, published on GitHub. It is a 2-layer board measuring 90 × 38 mm, with 32 components from 21 distinct parts.
Other key parts include the MC34063. By type, the board carries 13 resistors, 6 connectors, 4 capacitors, 3 transistors, 2 diodes and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
LCD-OLinuXino-5CTS is a 5 inch display with resolution of 800x480 pixels and capacitive touch screen.
LCD-OLinuXino-5CTS is a 5 inch display with resolution of 800x480 pixels and capacitive touch screen.
LCD-OLINUXINO-5CTS uses the legacy driver board design, not the common LCD-DRIVER board.
Main components on the LCD-OLinuXino-5TS Rev.B
LCD-OLinuXino-5TS Rev.B bill of materials (BOM)
32 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34063 | SO-8 | U1 |
| 2 | DTC114YKA | SOT23 | Q1, Q3 |
| 1 | DTA114YKA | SOT23 | Q2 |
| 1 | CONN_01X06 | FPV-WZB21-6-LF | P1 |
| 1 | CONN_02X20 | GBH-254-SMT-40 | P2 |
| 1 | CONN_02X20 | GPH127SMT-02X20(PA-V16X-2X20-LF) | P3 |
| 2 | CONN_01X40 | FPV-WZA21-40-LF | P5, P6 |
| 1 | CONN_01X06 | SIP6_SMD_50 | P7 |
| 2 | IRML6402 | SOT23 | FET1, FET2 |
| 1 | 1N5819S(SS14) | SMA-KA | D1 |
| 1 | BAT54C | SOT23 | D2 |
| 1 | 220uH/SD75 | SD75 | L1 |
| 1 | 100uF/35V | CAP-EL-H-12x6.5 | C1 |
| 1 | 470pF | C_0603_5MIL_DWS | C2 |
| 1 | 22uF/6.3V | C_0805_5MIL_DWS | C3 |
| 1 | 1uF/6.3V | C_0603_5MIL_DWS | C4 |
| 4 | 18K/1% | R_0603_5MIL_DWS | R1, R5, R6, R13 |
| 1 | 1R | R_0603_5MIL_DWS | R2 |
| 1 | 150R | R_0603_5MIL_DWS | R3 |
| 3 | 1.2K/1% | R_0603_5MIL_DWS | R4, R7, R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0R | 0R_0603 | R9, R10, R11, R12 |
LCD-OLinuXino-5TS Rev.B design files
The KiCad project lives in the DrYouu/putifrog-klipper repository on GitHub; these links point at the commit this page was built from.
LCD-OLinuXino-5TS Rev.B: common questions
How big is the LCD-OLinuXino-5TS Rev.B PCB?
The LCD-OLinuXino-5TS Rev.B measures 90 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LCD-OLinuXino-5TS Rev.B?
32 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the LCD-OLinuXino-5TS Rev.B design files?
From the DrYouu/putifrog-klipper repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LCD-OLinuXino-5TS Rev.B design in my own project?
The repository has no license, so all rights stay with DrYouu. Use it as a reference, and ask the author before reusing the design.
More boards in putifrog-klipper
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k