LCD-OLinuXino-15.6FHD Rev H
DrYouu·putifrog-klipper·docs/hardware/OLINUXINO-master/HARDWARE/LCDs/LCD-OLinuXino-15.6FHD/Hardware revision H/LCD-OLinuXino-15.6FHD_Rev_H.kicad_pcb
About the LCD-OLinuXino-15.6FHD Rev H PCB
LCD-OLinuXino-15.6FHD Rev H is an open source PIC PCB design by DrYouu, published on GitHub. It is a 4-layer board measuring 60 × 71 mm, with 59 components from 31 distinct parts.
Its main chip is the PIC10F206-I/OT, from the PIC family. Other key parts include the MCP1700-1202, NCS8801 and MT3608. By type, the board carries 22 capacitors, 13 resistors, 5 inductors, 4 ICs, 3 diodes and 2 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
Pronounced 'Oh-LIH-nuh-zeeno' The name OLinuXino refers to a series of Single Board Computers (SBCs) developed and produced by Olimex LTD. These SBCs are known for their robustness and versatility, and they are completely open-source, meaning that the hardware and software design
Pronounced 'Oh-LIH-nuh-zeeno' The name OLinuXino refers to a series of Single Board Computers (SBCs) developed and produced by Olimex LTD. These SBCs are known for their robustness and versatility, and they are completely open-source, meaning that the hardware and software designs are publicly available for anyone to review, modify, and redistribute. The OLinuXino SBCs have received certifications from the Open Source Hardware Foundation (OSHW), which guarantees that the hardware and software designs meet certain criteria for openness and transparency. Overall, the OLinuXino family of SBCs…
Main components on the LCD-OLinuXino-15.6FHD Rev H
LCD-OLinuXino-15.6FHD Rev H bill of materials (BOM)
59 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC10F206-I/OT | SOT23-6 | IC1 |
| 1 | MCP1700-1202 | SOT89 | U1 |
| 1 | NCS8801 | QFN56_7x7mm_0.4p | U2 |
| 1 | MT3608 | SOT23-6 | U3 |
| 1 | 4SB24.000F20E15/5x3.2mm/20ppm/20pF | Q5x3.25 | Q1 |
| 1 | CONN_01X40 | FPV-WZA21-40-LF | P1 |
| 1 | ICSP | ICSP | P2 |
| 1 | IRLML6402 | SOT23 | FET1 |
| 2 | ML40-GPH127SMT-0X20 | GPH127SMT-02X20(PA-V16X-2X20-LF) | LIME1, LIME2 |
| 1 | 5 .. 16V DC | PWR-JACK-MIL-SMT | PWR1 |
| 1 | (na) | R_MATRIX_4_KICAD | RM1 |
| 1 | FPV-WZA21-40-LF | FPV-WZA21-40-LF | SOM204-LVDS1 |
| 1 | DTC114YKA(SOT-23) | SOT23 | T1 |
| 1 | LCD_CONN | eDP-TERES | eDP1 |
| 1 | ML40-GBH-254-SMT-40 | GBH-254-SMT-40 | uICR1 |
| 1 | SS34 | SOD106-R-KA | D1 |
| 1 | BAT54C | SOT23 | D2 |
| 1 | SS34 | SMB-KA | D3 |
| 3 | FB0805 | L_0805_5MIL_DWS | FB1, FB2, FB3 |
| 1 | (na) FB0805 | L_0805_5MIL_DWS | FB4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL22uH / YS75 | SD75 | L1 |
| 2 | 1uF | C_0603_5MIL_DWS | C1, C2 |
| 16 | 100nF | C_0402_5MIL_DWS | C3, C4, C5, C6, C7, C8, C9, C11 +8 |
| 2 | 33pF | C_0402_5MIL_DWS | C10, C12 |
| 2 | 1uF/50V | C_0603_5MIL_DWS | C20, C21 |
| 5 | 2.2K | R_0402_5MIL_DWS | R1, R2, R3, R4, R10 |
| 3 | 10K | R_0402_5MIL_DWS | R5, R6, R8 |
| 1 | 10K | R0402 | R11 |
| 2 | (na) 100K | R0402 | R12, R15 |
| 1 | 20K 1% | R_0603_5MIL_DWS | R13 |
| 1 | 1.05K 1% | R_0603_5MIL_DWS | R14 |
LCD-OLinuXino-15.6FHD Rev H design files
The KiCad project lives in the DrYouu/putifrog-klipper repository on GitHub; these links point at the commit this page was built from.
LCD-OLinuXino-15.6FHD Rev H: common questions
What microcontroller does the LCD-OLinuXino-15.6FHD Rev H use?
The LCD-OLinuXino-15.6FHD Rev H is built around the PIC10F206-I/OT, from the PIC family.
How big is the LCD-OLinuXino-15.6FHD Rev H PCB?
The LCD-OLinuXino-15.6FHD Rev H measures 60 × 71 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LCD-OLinuXino-15.6FHD Rev H?
59 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the LCD-OLinuXino-15.6FHD Rev H design files?
From the DrYouu/putifrog-klipper repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LCD-OLinuXino-15.6FHD Rev H design in my own project?
The repository has no license, so all rights stay with DrYouu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LCD-OLinuXino-15.6FHD Rev H without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in putifrog-klipper
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379