HDD-Payload-ESC
Dsmannight·HDD-Payload-ESC
About the HDD-Payload-ESC PCB
HDD-Payload-ESC is an open source STM32 PCB design by Dsmannight, published on GitHub. It is a board, with 79 components from 29 distinct parts.
Its main chip is the STM32G431CBUx, from the STM32 family. Other key parts include the AP3402, Opamp_Dual and IR2101. By type, the board carries 27 resistors, 20 capacitors, 10 diodes, 8 ICs, 6 transistors and 4 connectors.
From the project
Schematic and PCB Design of HDD Payload Controls for UC Davis Cube Satalite
Main components on the HDD-Payload-ESC
HDD-Payload-ESC bill of materials (BOM)
79 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | AP3402 | TSOT-23-6 | U2 |
| 3 | Opamp_Dual | U4, U10, U12 | |
| 3 | IR2101 | U5, U9, U11 | |
| 6 | NMOS | Q1, Q2, Q3, Q4, Q5, Q6 | |
| 1 | Conn_01x05_Pin | J1 | |
| 1 | Conn_01x03_Pin | J2 | |
| 1 | Conn_01x06_Pin | J3 | |
| 1 | Conn_01x02_Pin | J4 | |
| 1 | MF-PSMFO75X-2 | F1 | |
| 1 | SW_Push | SW1 | |
| 1 | LED_RGB | D1 | |
| 6 | SBD | D_SMA | D2, D3, D6, D7, D9, D10 |
| 3 | D_Small | D4, D5, D8 | |
| 1 | 39n | L_0402_1005Metric | L1 |
| 1 | 2.2u | L2 | |
| 1 | 4u7 | C1 | |
| 3 | 100n | C2, C3, C4 | |
| 1 | 1u | C_0402_1005Metric | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22u | C8, C10 | |
| 6 | 100p | C11, C12, C17, C18, C29, C30 | |
| 6 | C_Small | C13, C14, C15, C16, C19, C20 | |
| 3 | 47m | R1, R20, R42 | |
| 1 | 300k | R2 | |
| 1 | 150k | R3 | |
| 9 | 10k | R4, R5, R6, R10, R11, R18, R19, R40 +1 | |
| 7 | 100k | R7, R8, R9, R16, R17, R38, R39 | |
| 6 | R_Small | R12, R13, R14, R15, R21, R37 |
HDD-Payload-ESC design files
The KiCad project lives in the Dsmannight/HDD-Payload-ESC repository on GitHub; these links point at the commit this page was built from.
- SchematicHDD_Payload_ESC.kicad_sch
HDD-Payload-ESC: common questions
What microcontroller does the HDD-Payload-ESC use?
The HDD-Payload-ESC is built around the STM32G431CBUx, from the STM32 family.
How many components are on the HDD-Payload-ESC?
79 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the HDD-Payload-ESC design files?
From the Dsmannight/HDD-Payload-ESC repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the HDD-Payload-ESC design in my own project?
The repository has no license, so all rights stay with Dsmannight. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HDD-Payload-ESC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k