HardLabs

Hardware

dtjandra888·Hardware·macro/macro.kicad_pcb

Hardware PCB layout, top view — open source RP2040/RP2350 board by dtjandra888
Simulate this board

About the Hardware PCB

Hardware is an open source RP2040/RP2350 PCB design by dtjandra888, published on GitHub. It is a 2-layer board measuring 58 × 50 mm, with 9 components from 5 distinct parts.

Its main chip is the RP2040_ZERO, from the RP2040/RP2350 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 LED.

Main components on the Hardware

RP2040_ZERO

Hardware bill of materials (BOM)

9 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040_ZERO
RP2040_Zero
U1
3
~
S1, S2, S3
1
SW_Push
SW1
1
WaveShare 0.96inch OLED Display Module
OLED1
3
~
D1, D2, D3

Hardware design files

The KiCad project lives in the dtjandra888/Hardware repository on GitHub; these links point at the commit this page was built from.

Hardware: common questions

What microcontroller does the Hardware use?

The Hardware is built around the RP2040_ZERO, from the RP2040/RP2350 family.

How big is the Hardware PCB?

The Hardware measures 58 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hardware?

9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hardware design files?

From the dtjandra888/Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hardware design in my own project?

The repository has no license, so all rights stay with dtjandra888. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards