DuckyMidi

DuckyBoi-XD·DuckyMidi·PCB/DuckyMidi.kicad_pcb

About the DuckyMidi PCB

DuckyMidi is an open source RP2040/RP2350 PCB design by DuckyBoi-XD, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 327.7 × 109.7 mm, with 78 components from 6 distinct parts.

Its main chip is the Orpheus_Pico, from the RP2040/RP2350 family. Other key parts include the PCM5100. By type, the board carries 38 diodes, 37 switches, 1 IC, 1 module and 1 connector.

From the project

The production file is the file that I would send to the manufacturer

Main components on the DuckyMidi

PCM5100 Orpheus_Pico

DuckyMidi bill of materials (BOM)

78 components, 6 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	PCM5100	TSSOP-20_4.4x6.5mm_P0.65mm	U1
1	Orpheus_Pico	RaspberryPi_Pico_Common_Unspecified	A1
1	ST7735R	PinHeader_1x08_P2.54mm_Vertical	J1
36	SW_Push_45deg	MX_PCB_1.00u	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +28
1	SW_SPST	PinHeader_1x02_P2.54mm_Vertical	SW37
38	1N4148	D_DO-35_SOD27_P7.62mm_Horizontal	D1, D2, D3, D4, D5, D6, D7, D8 +30

DuckyMidi design files

The KiCad project lives in the DuckyBoi-XD/DuckyMidi repository on GitHub; these links point at the commit this page was built from.

DuckyMidi: common questions

What microcontroller does the DuckyMidi use?

The DuckyMidi is built around the Orpheus_Pico, from the RP2040/RP2350 family.

How big is the DuckyMidi PCB?

The DuckyMidi measures 327.7 × 109.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DuckyMidi?

78 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DuckyMidi design files?

From the DuckyBoi-XD/DuckyMidi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DuckyMidi design in my own project?

Yes, under the terms of its GPL-3.0 license, which DuckyBoi-XD chose for the repository.

Can I test firmware for the DuckyMidi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.