6 open source boards using the Orpheus_Pico
Real designs built with the Orpheus_Pico, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Synthetizer
ImMagni
406 × 90 mm106 parts2LMIT0RP2040/RP2350
DuckyMidi
DuckyBoi-XD
327.7 × 109.7 mm78 parts2LGPL-3.00Raspberry Pi
Mini Midi
Mithilessh2010
327.7 × 109.7 mm78 parts2LNo license0RP2040/RP2350
Minimidi
Hita-haru
271 × 120 mm73 parts2LNo license0RP2040/RP2350
Mini-MIDI-Magic
arghya-v
250 × 116 mm49 parts2LNo license0RP2040/RP2350
MIDI Board
Mithilessh2010
250 × 116 mm49 parts2LNo license0
How designs wire the Orpheus_Pico
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Orpheus_Pico connects to, and the resistors, capacitors and other passives placed on it.
- The ADC_VREF pin is left unconnected on 5 of 5 designs.
- The 3V3 pin is tied to 3.3V on 5 of 5 designs.
- The 3V3_EN pin is left unconnected on 5 of 5 designs.
- The VSYS pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 8, 13, 18, 23, 28, 38 | Connected to: GND 100% | — |
| AGNDpin 33 | Connected to: Not connected 80% · GND 20% | — |
| ADC_VREFpin 35 | Connected to: Not connected 100% | — |
| 3V3pin 36 | Connected to: 3.3V 100% | — |
| 3V3_ENpin 37 | Connected to: Not connected 100% | — |
| VSYSpin 39 | Connected to: Not connected 100% | — |
| VBUSpin 40 | Connected to: Not connected 100% | — |
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mini-MIDI-Magic by arghya-v, DuckyMidi by DuckyBoi-XD, Minimidi by Hita-haru and Synthetizer by ImMagni.
The Orpheus_Pico in open source designs
The gallery holds 6 open source boards using the Orpheus_Pico from 5 GitHub repositories; a typical one measures about 299.3 × 112.9 mm and carries around 76 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Synthetizer by ImMagni.
Microcontrollers on boards using the Orpheus_Pico
What boards using the Orpheus_Pico are built for
Orpheus_Pico: common questions
Where can I find a Orpheus_Pico reference design?
Each of the 6 boards on this page is a real design using the Orpheus_Pico. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Orpheus_Pico ADC_VREF pin connected?
The ADC_VREF pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Orpheus_Pico.
How is the Orpheus_Pico 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Orpheus_Pico.
How is the Orpheus_Pico 3V3_EN pin connected?
The 3V3_EN pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Orpheus_Pico.
Which microcontrollers do boards using the Orpheus_Pico use?
Most are built on RP2040/RP2350 (5) and Raspberry Pi (1).
How big is a typical board using the Orpheus_Pico?
The median is 299.3 × 112.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the Orpheus_Pico?
By GitHub stars, Synthetizer by ImMagni, with 0 stars.
Can I simulate one of these boards using the Orpheus_Pico before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.