UBITz-Host-6309
About the UBITz-Host-6309 PCB
UBITz-Host-6309 is an open source PCB design by dumaiss, published on GitHub under the SHL-2.1 license. It is a 4-layer board measuring 84.4 × 108.4 mm, with 24 components from 11 distinct parts.
Other key parts include the MC6809E, ATF1504AS-10AU100 and 24LC16BT-I/SN. By type, the board carries 13 capacitors, 3 ICs, 3 connectors, 3 resistors, 1 crystal and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
**μBITz** – *ZAP 80s dreams into silicon.* Open modular 8-bit system: dock Z80/6502, tile SID/POKEY, boot in '83. M.2 LVDS serial, I²C map, Parity-10, ZAP IRQs. Spec + KiCad + Verilog + ref impl. Build. ZAP. Retro lives. `ubitz.dev` #μBITz
Open modular 8-bit style system: host Z80/6502/68k/RISC-V, tile SID/POKEY, boot in '83. M.2 LVDS serial, I²C map, Parity-10, ZAP IRQs. Spec + KiCad + Verilog + ref impl. Build. ZAP. Retro lives. ubitz.dev #μBITz
Main components on the UBITz-Host-6309
UBITz-Host-6309 bill of materials (BOM)
24 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC6809E | DIP-40_W15.24mm | U1 |
| 1 | ATF1504AS-10AU100 | 100A_ATM | U5 |
| 1 | 24LC16BT-I/SN 24LC16BT-I_SN | SOIC127P600X175-8N | U11 |
| 1 | ACH-14.31818MHZ-EK | XTAL_ACH-14.31818MHZ-EK | Y1 |
| 1 | ~ | BUS_PCIexpress_x16 | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Top_Bottom | PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | BAT54C | SOT-23 | D1 |
| 10 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9, C10, C11, C12, C13 +2 |
| 3 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C17, C18 |
| 3 | 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8 |
UBITz-Host-6309 design files
The KiCad project lives in the dumaiss/uBITz repository on GitHub; these links point at the commit this page was built from.
UBITz-Host-6309: common questions
How big is the UBITz-Host-6309 PCB?
The UBITz-Host-6309 measures 84.4 × 108.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the UBITz-Host-6309?
24 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the UBITz-Host-6309 design files?
From the dumaiss/uBITz repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UBITz-Host-6309 design in my own project?
It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.
More boards in uBITz
UBITz-Dock-Power-Impl
1.3 × 1.7 mm90 parts2LSHL-2.10
UBITz-Host z80-Host
84.3 × 108.4 mm48 parts4LSHL-2.10
UBITz-Host z80-Host-No-Mapper
84.3 × 108.4 mm24 parts4LSHL-2.10
USB-JTAG-Programmer
31 × 35 mm24 parts4LSHL-2.10
UBITz-Basic-Bank-With-Cartridge
84.3 × 110 mm6 parts4LSHL-2.10
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k
Rgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k
X1
121.9 × 81.3 mm51 parts2LGPL-3.01.0k
Amiga External
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Videoslotadapter
152 × 57.6 mm13 parts2LGPL-3.01.0k