23 open source boards using the MC6809E
Real designs built with the MC6809E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TRS-80 Color Computer 3
qbancoffee
280 × 156.3 mm205 parts2LGPL-3.040Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license346809v2
jbevren
99.1 × 99.1 mm52 parts2LNo license22RP2040/RP2350
Tfr9
strickyak
82.8 × 62.8 mm106 parts4LMIT12Dragon32Issue2
jimbro1000
253 × 169.1 mm206 parts2LMIT8Dragon32Rev3
jimbro1000
253 × 169.1 mm169 parts2LMIT3CPU 6809 board
roberto314
100 × 100 mm72 parts2LNo license1Dragon32Issue2aSecam
jimbro1000
253 × 199.1 mm206 parts2LMIT0Pico-Thing
markrvmurray
273 × 178 mm171 parts4LBSD-2-Clause06809e adapter
hoglet67
49 × 75.2 mm55 parts2LGPL-3.01096809e adapter
hoglet67
49 × 75.2 mm55 parts2LNo license66TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B)
qbancoffee
230 × 170 mm150 parts2LGPL-3.040Backup
danwerner21
333.2 × 205.9 mm218 parts2LNo license346809e adapter
sharpie7
49 × 75.2 mm55 parts2LGPL-2.0196809e adapter
DopierRex
49 × 75.2 mm55 parts2LGPL-3.010LogicBoard 3GE Repro
tullulah
99.2 × 101 mm159 parts4LGPL-3.03TRS-80 Color Computer 3
baldengineer
280 × 155.3 mm204 parts2LCC-BY-4.0442Backup1
danwerner21
333.2 × 205.9 mm218 parts2LNo license346809e adapter
hoglet67
49 × 75.2 mm55 parts2LGPL-3.017UBITz-Host-6309
dumaiss
84.4 × 108.4 mm24 parts4LSHL-2.10TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B)
baldengineer
230 × 170 mm150 parts2LCC-BY-4.0442NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license5326809 CPU
roberto314
100 × 100 mm39 parts2LBSD-2-Clause0
How designs wire the MC6809E
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the MC6809E connects to, and the resistors, capacitors and other passives placed on it.
- The IRQ pin has a pull-up to 5V on 15 of 19 designs, most often 4.7 kΩ (then 22 kΩ).
- The NMI pin has a pull-up to 5V on 14 of 19 designs, most often 4.7 kΩ (then 22 kΩ).
- The HALT pin has a pull-up to 5V on 14 of 19 designs, most often 4.7 kΩ (then 22 kΩ).
- The FIRQ pin has a pull-up to 5V on 13 of 19 designs, most often 4.7 kΩ (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 100% | — |
| NMIpin 2 | Connected to: A connector 37%, 74LVC4245 26% |
|
| IRQpin 3 | Connected to: 74LVC4245 26% |
|
| FIRQpin 4 | Connected to: 74LVC4245 26% |
|
| VCCpin 7 | Connected to: 5V 100% | — |
| Epin 34 | Connected to: Signal 100% |
|
| RESETpin 37 | Connected to: A connector 32%, 74LVC4245 26% |
|
| HALTpin 40 | Connected to: A connector 37%, 74LVC4245 26% |
|
32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL6809 PCB by MicroCoreLabs, TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B) by baldengineer, 6809e adapter by hoglet67 and 6809e adapter by hoglet67.
The MC6809E in open source designs
The gallery holds 23 open source boards using the MC6809E from 19 GitHub repositories; a typical one measures about 100 × 108.3 mm and carries around 150 components.
78% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.
The most starred is MCL6809 PCB by MicroCoreLabs.
Parts used alongside the MC6809E
Microcontrollers on boards using the MC6809E
What boards using the MC6809E are built for
MC6809E: common questions
Where can I find a MC6809E reference design?
Each of the 23 boards on this page is a real design using the MC6809E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MC6809E IRQ pin?
The IRQ pin has a pull-up to 5V on 15 of 19 designs, most often 4.7 kΩ (then 22 kΩ). Counted from the KiCad layouts of 19 open source designs using the MC6809E.
What pull-up resistor is used on the MC6809E NMI pin?
The NMI pin has a pull-up to 5V on 14 of 19 designs, most often 4.7 kΩ (then 22 kΩ). Counted from the KiCad layouts of 19 open source designs using the MC6809E.
What pull-up resistor is used on the MC6809E HALT pin?
The HALT pin has a pull-up to 5V on 14 of 19 designs, most often 4.7 kΩ (then 22 kΩ). Counted from the KiCad layouts of 19 open source designs using the MC6809E.
What parts are used alongside the MC6809E?
The 74LV1T125, 74LVC4245, 74LS04, 27C256 and 74LS02 appear in the most repositories here.
Which microcontrollers do boards using the MC6809E use?
Most are built on NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the MC6809E?
The median is 100 × 108.3 mm, and 78% are two-layer designs.
What is the most popular open source board using the MC6809E?
By GitHub stars, MCL6809 PCB by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the MC6809E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.