1v2-5v buck
dumitrescuoctavian22·1v2-5v_buck·hardware/12-3v3-buck.kicad_pcb
About the 1v2-5v buck PCB
1v2-5v buck is an open source PCB design by dumitrescuoctavian22, published on GitHub. It is a 2-layer board measuring 44.3 × 20.6 mm, with 19 components from 14 distinct parts.
Other key parts include the TPS62933P. By type, the board carries 7 capacitors, 7 resistors, 2 ICs, 2 connectors and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
A buck converter that takes usb-c input and outputs 5 selectable voltages, ranging from 1v2 to 5v.
A compact USB-C powered synchronous buck converter designed to provide a fixed 5 V rail and a selectable regulated output.
The project focuses on practical power electronics design, DC/DC converter selection, feedback network design, USB-C power input, PCB layout, high-current routing, mechanical design, and custom KiCad library development.
USB-C 5 V power input Up to 3 A continuous output capability Synchronous buck converter Selectable regulated output:
Main components on the 1v2-5v buck
1v2-5v buck bill of materials (BOM)
19 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SP4T Rotary Switch S-2051 | U1 |
| 1 | TPS62933P | SOT-583-8 | U2 |
| 1 | TYPE-C16PIN | CONN16_C16PIN_SHN | J1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | 6u8 | L_APV_ANR6045 | L1 |
| 1 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 3 | u1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C7 |
| 1 | 47u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 2 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6 |
| 3 | 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7 |
| 1 | 10k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 31k6 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 21k5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 12k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
1v2-5v buck design files
The KiCad project lives in the dumitrescuoctavian22/1v2-5v_buck repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/12-3v3-buck.kicad_pcb
- Schematichardware/12-3v3-buck.kicad_sch
1v2-5v buck: common questions
How big is the 1v2-5v buck PCB?
The 1v2-5v buck measures 44.3 × 20.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1v2-5v buck?
19 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the 1v2-5v buck design files?
From the dumitrescuoctavian22/1v2-5v_buck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 1v2-5v buck design in my own project?
The repository has no license, so all rights stay with dumitrescuoctavian22. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k