HardLabs

Ildagenerator

dusjagr·Axoloti_Laser_Interface·ILDA-master/hardware/kicad/ildagenerator.kicad_pcb

Ildagenerator PCB layout, top view — open source board by dusjagr
Simulate this board

About the Ildagenerator PCB

Ildagenerator is an open source PCB design by dusjagr, published on GitHub. It is a board measuring 76 × 54.2 mm, with 94 components from 16 distinct parts.

Other key parts include the LTC2656BIFE-L16, LT1356CN and NMA0509SC. By type, the board carries 60 resistors, 8 connectors, 6 fuses, 5 ICs and 2 capacitors.

It belongs with the audio designs in this gallery.

From the project

Adding some special outputs to Axoloti to control a Laser projector. X-Y on audio, 3 RGB outputs on PWM

1. Hardware: In this section you find a 16bit 6ch DAC for ILDA. Reaching 22kpps (measured with ILDA Test Pattern, theoretical up to 400kpps) limited by the controling "Raspberry Pi". It is resulting in a resolution of 4294967296 positions (~4295 megapixels). The asynchronous LDAC update pin at the DAC, immediately updates the DAC register with the contents of the input register, so all outputs change at the same time and can be synchronised with an external clock. 2. Software: C based software to control the ILDA-DAC with a "Raspberry Pi". Supports all Files based on the ILDA Image Data…

Main components on the Ildagenerator

LTC2656BIFE-L16LT1356CNNMA0509SC

Ildagenerator bill of materials (BOM)

94 components, 16 distinct parts.

QtyPartRefs
1
LTC2656BIFE-L16
U1
3
LT1356CN
U2, U3, U4
1
NMA0509SC
U5
1
Out X
P1
1
Out Y
P2
1
Out Red
P3
1
Out Green
P4
1
Out Blue
P5
1
Out C1
P6
1
CONN_6
P7
1
CONN_4
P8
6
1µ
F1, F2, F3, F4, F5, F6
13
5.6V
MOV1, MOV2, MOV3, MOV4, MOV5, MOV6, MOV7, MOV8 +5
2
0.1µF
C1, C2
48
10kΩ
R1, R2, R3, R4, R5, R6, R7, R8 +40
12
470Ω
R17, R18, R21, R22, R25, R26, R29, R30 +4

Ildagenerator design files

The KiCad project lives in the dusjagr/Axoloti_Laser_Interface repository on GitHub; these links point at the commit this page was built from.

Ildagenerator: common questions

How big is the Ildagenerator PCB?

The Ildagenerator measures 76 × 54.2 mm and is 1.6002 mm thick.

How many components are on the Ildagenerator?

94 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ildagenerator design files?

From the dusjagr/Axoloti_Laser_Interface repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Ildagenerator design in my own project?

The repository has no license, so all rights stay with dusjagr. Use it as a reference, and ask the author before reusing the design.

Similar boards