HardLabs

Cheap focer clone revA (rect 50V/35A)

duwogus7650-ctrl·board-design·out/cheap_focer_clone/cheap_focer_clone.kicad_pcb

Cheap focer clone revA (rect 50V/35A) PCB layout, top view — open source board by duwogus7650-ctrl
Simulate this board

About the Cheap focer clone revA (rect 50V/35A) PCB

Cheap focer clone revA (rect 50V/35A) is an open source PCB design by duwogus7650-ctrl, published on GitHub. It is a 2-layer board measuring 100 × 60 mm, with 15 components from 4 distinct parts.

It belongs with the robotics & motion designs in this gallery.

From the project

OpenRobot SPN-MC(=VESCular6, VESC6 파생) 동등 기능의 QDD용 원형 모터 컨트롤러를 오픈소스 VESC6를 베이스로 신규 설계하는 프로젝트.

OpenRobot SPN-MC(=VESCular6, VESC6 파생) 동등 기능의 QDD용 원형 모터 컨트롤러를 오픈소스 VESC6를 베이스로 신규 설계하는 프로젝트.

생성물 out//에는 자체포함 KiCad 9 PCB(실제 풋프린트+패드+마운팅홀+외곽선, 외부 라이브러리 불필요), 네트리스트(~45개 네트 → 러츠네스트 + -netlist.txt/.csv), 자동배선(A + 비아 + 리핑업), 전원/상 구리 포어, 거버/드릴 zip(fab/), BOM/CPL, 검증 리포트, PNG가 들어간다. 오픈소스 근거: VESC6, Cheap-FOCer-2(dongilc), ODrive, moteus + TI/ST/onsemi/Infineon/NXP/ams/MagnTek 부품. - 프로그램 설명: docs/08qddgenprogram.md, qddgen/README.md - KiCad 처음이면: docs/09kicadbeginnerguide.md (열기·확인·DRC·문제·조치) - 생성 보드 검증 체크리스트: docs/10kicadverifychecklist.md` (존 채우기·6층·DRC·마무리)

Cheap focer clone revA (rect 50V/35A) bill of materials (BOM)

15 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
IPT007N06N
Infineon
Q1, Q2, Q3, Q4, Q5, Q6
2
bulk_cap
C_BULK1, C_BULK2
4
C_0402
C_D1, C_D2, C_D3, C_D4
3
shunt
R_SH1, R_SH2, R_SH3

Cheap focer clone revA (rect 50V/35A) design files

The KiCad project lives in the duwogus7650-ctrl/board-design repository on GitHub; these links point at the commit this page was built from.

Cheap focer clone revA (rect 50V/35A): common questions

How big is the Cheap focer clone revA (rect 50V/35A) PCB?

The Cheap focer clone revA (rect 50V/35A) measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cheap focer clone revA (rect 50V/35A)?

15 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cheap focer clone revA (rect 50V/35A) design files?

From the duwogus7650-ctrl/board-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Cheap focer clone revA (rect 50V/35A) design in my own project?

The repository has no license, so all rights stay with duwogus7650-ctrl. Use it as a reference, and ask the author before reusing the design.

More boards in board-design

Similar boards