HardLabs

Skeeby

DVDTSB·skeeby

Skeeby PCB layout, top view — open source RP2040/RP2350 board by DVDTSB

About the Skeeby PCB

Skeeby is an open source RP2040/RP2350 PCB design by DVDTSB, published on GitHub. It is a 2-layer board measuring 309.6 × 100 mm, with 141 components from 11 distinct parts.

Its main chip is the RP2040_Zero, from the RP2040/RP2350 family. By type, the board carries 68 switches, 68 diodes and 1 IC.

Main components on the Skeeby

RP2040_Zero

Skeeby bill of materials (BOM)

141 components, 11 distinct parts.

QtyPartRefs
1
RP2040_Zero
U1
3
SW_stab
ST14, ST43, ST45
1
SW_stab
ST62
57
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +49
1
SW_Push
SW14
2
SW_Push
SW16, SW29
2
SW_Push
SW31, SW56
2
SW_Push
SW43, SW45
3
SW_Push
SW59, SW60, SW61
1
SW_Push
SW62
68
D
D1, D2, D3, D4, D5, D6, D7, D8 +60

Skeeby design files

The KiCad project lives in the DVDTSB/skeeby repository on GitHub; these links point at the commit this page was built from.

Skeeby: common questions

What microcontroller does the Skeeby use?

The Skeeby is built around the RP2040_Zero, from the RP2040/RP2350 family.

How big is the Skeeby PCB?

The Skeeby measures 309.6 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Skeeby?

141 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Skeeby design files?

From the DVDTSB/skeeby repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Skeeby design in my own project?

The repository has no license, so all rights stay with DVDTSB. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Skeeby without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards