DTS Board
About the DTS Board
DTS Board is an open source NXP PCB design by EBOThor, published on GitHub under the MIT license. It is a 2-layer board measuring 167.6 × 81.3 mm, with 80 components from 45 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the 93AA46BT-I/OT, PIC18F67J60T-I/PT, LMR51610-Q1, MCP23S17-E_ML and LM7805_TO220. By type, the board carries 28 resistors, 27 capacitors, 11 ICs, 5 connectors and 2 diodes.
From the project
Digital to Synchro board
Main components on the DTS Board
DTS Board bill of materials (BOM)
80 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 93AA46BT-I/OT LTC1590 | DIP-16_W7.62mm | U2001 |
| 1 | PIC18F67J60T-I/PT LM324A | DIP-14_W7.62mm | U2002 |
| 1 | LMR51610-Q1 LM324A | DIP-14_W7.62mm | U3001 |
| 1 | MCP23S17-E_ML LM7815_TO220 | TO-220-3_Vertical | U4001 |
| 1 | MCP23S17-E_ML LM7915_TO220 | TO-220-3_Vertical | U4002 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U4003 |
| 1 | PC847 | DIP-16_W7.62mm | U5001 |
| 1 | Teensy4.1 | Teensy41 | U5002 |
| 1 | MCP2551-I-P | DIP-8_W7.62mm | U5003 |
| 1 | 114-SG3225CAN25.0000M-TJGA6 LM1875 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U6001 |
| 1 | MCP2515T-E/ML LM1875 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U6002 |
| 1 | 400Hz | PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J1001 |
| 1 | Power | PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1002 |
| 1 | CAN | PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1003 |
| 1 | DTS | PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J1004 |
| 1 | 41010276 ETH | RJ45_LED_Shield | J5001 |
| 2 | Heatsink_Pad | Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3 | HS6001, HS6002 |
| 4 | 20k | Potentiometer_Bourns_3266W_Vertical | RV3001, RV3002, RV6001, RV6002 |
| 1 | TRANSF5 | Audio_trafo_6_pin | TR3001 |
| 2 | PESD2USB3UXT-Q 1N5400 | D_DO-201AD_P15.24mm_Horizontal | D4001, D4002 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 311-1341-1 33p | C_0805_2012Metric | C2001, C2002, C3003, C6005 |
| 4 | 311-1341-1 100n | C_0805_2012Metric | C2003, C2004, C2005, C5002 |
| 1 | 732-8449-1 4.7n | C_0805_2012Metric | C3001 |
| 1 | 490-13248-1 33p | C_0805_2012Metric | C3002 |
| 3 | 311-1341-1 47u | CP_Radial_D8.0mm_P3.80mm | C4001, C4002, C4003 |
| 1 | 311-1341-1 22p | C_0805_2012Metric | C5001 |
| 4 | 100n | C_0805_2012Metric | C5003, C5004, C5005, C5006 |
| 4 | 311-1341-1 1u | C_1206_3216Metric | C6001, C6002, C6003, C6004 |
| 1 | 33p | C_0805_2012Metric | C6006 |
| 4 | 1u | C_1206_3216Metric | C6007, C6008, C6009, C6010 |
| 3 | 10K 20k | R_0805_2012Metric | R2002, R2006, R2007 |
| 1 | 2K2 20k | R_0805_2012Metric | R2003 |
| 4 | 10K 10k | R_0805_2012Metric | R2004, R3005, R6001, R6002 |
| 1 | 620R 10k | R_0805_2012Metric | R2005 |
| 1 | 2K2 10k | R_0805_2012Metric | R3003 |
| 1 | 43K 10k | R_0805_2012Metric | R3004 |
| 1 | 200R 1k | R_0805_2012Metric | R3006 |
| 2 | 510K 1k | R_0805_2012Metric | R5001, R5002 |
| 2 | 49R9 1k | R_0805_2012Metric | R5003, R5004 |
| 2 | 49R9 120 | R_0805_2012Metric | R5005, R5006 |
| 3 | 120 | R_0805_2012Metric | R5007, R5008, R5013 |
| 4 | 0 | R_0805_2012Metric | R5009, R5010, R5011, R5012 |
| 1 | 47k | R_0805_2012Metric | R5014 |
| 1 | 3k3 | R_0805_2012Metric | R5015 |
| 1 | 2k2 | R_0805_2012Metric | R5016 |
DTS Board design files
The KiCad project lives in the EBOThor/DTS_Board repository on GitHub; these links point at the commit this page was built from.
DTS Board: common questions
What microcontroller does the DTS Board use?
The DTS Board is built around the Teensy4.1, from the NXP family.
How big is the DTS Board?
The DTS Board measures 167.6 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DTS Board?
80 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DTS Board design files?
From the EBOThor/DTS_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DTS Board design in my own project?
Yes, under the terms of its MIT license, which EBOThor chose for the repository.
Can I test firmware for the DTS Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in DTS_Board
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532