7 open source boards using the PC847

Real designs built with the PC847, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the PC847

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PC847 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ).
  • Pin 3 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ).
  • Pin 5 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ).
  • Pin 7 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ).
Pin 1Connected to: Signal 100%
  • Series resistor on 67% · 470 Ω (1), 1 kΩ (1), 120 Ω (1)
Pin 3Connected to: Signal 100%
  • Series resistor on 67% · 470 Ω (1), 1 kΩ (1), 120 Ω (1)
Pin 5Connected to: Signal 100%
  • Series resistor on 67% · 470 Ω (1), 1 kΩ (1), 120 Ω (1)
Pin 7Connected to: Signal 100%
  • Series resistor on 67% · 470 Ω (1), 1 kΩ (1), 100 Ω (1)
Pin 11Connected to: GND 67% · a signal 33%
Pin 13Connected to: GND 67% · a signal 33%
Pin 15Connected to: GND 67% · a signal 33%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GX894-PWB by NaokiS28, Io8 by whowechina, ControlModule by enriquewph and Notemplate pcb by au-ts.

The PC847 in open source designs

The gallery holds 7 open source boards using the PC847 from 6 GitHub repositories; a typical one measures about 100 × 70 mm and carries around 67 components.

100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is GX894-PWB by NaokiS28.

Microcontrollers on boards using the PC847

PC847: common questions

Where can I find a PC847 reference design?

Each of the 7 boards on this page is a real design using the PC847. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the PC847 pin 1?

Pin 1 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the PC847.

What resistor goes on the PC847 pin 3?

Pin 3 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the PC847.

What resistor goes on the PC847 pin 5?

Pin 5 has a series resistor on 4 of 6 designs, most often 470 Ω (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the PC847.

Which microcontrollers do boards using the PC847 use?

Most are built on AVR/Arduino (1), ESP32 (1), NXP (1) and PIC (1).

How big is a typical board using the PC847?

The median is 100 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the PC847?

By GitHub stars, GX894-PWB by NaokiS28, with 16 stars.

Can I simulate one of these boards using the PC847 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part