Radiofm
eccnil·radiofm
About the Radiofm PCB
Radiofm is an open source PCB design by eccnil, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 38 components from 32 distinct parts.
Other key parts include the LM386. By type, the board carries 12 capacitors, 9 resistors, 4 transistors, 4 test points, 3 inductors and 1 IC.
It belongs with the rf & radio designs in this gallery.
From the project
Raw fm receiver radio. (electronics)
Main components on the Radiofm
Radiofm bill of materials (BOM)
38 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM386 | DIP-8_W7.62mm_LongPads | U1 |
| 4 | BF324 | TO-92L_HandSolder | Q1, Q2, Q3, Q4 |
| 1 | Antenna | Banana_Jack_1Pin | AE1 |
| 1 | 6v | SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief | BT1 |
| 1 | Speaker | SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief | LS1 |
| 1 | 10k | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | SW_Slide_DPDT | SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2 | SW1 |
| 1 | 0.2v | TestPoint_Keystone_5019_Miniature | TP2 |
| 1 | 0.66v | TestPoint_Keystone_5019_Miniature | TP3 |
| 1 | sound | TestPoint_Keystone_5019_Miniature | TP4 |
| 1 | preamp | TestPoint_Keystone_5019_Miniature | TP5 |
| 1 | 10 turns / 0.5mm SWG25 d = 3mm | L_Axial_L11.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_MECC | L1 |
| 1 | 12 turns / 0.5mm SWG25 d=5mm | L_Axial_L13.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_HCCC | L2 |
| 1 | 12 turns / 0.5mm SWG25 d=5mm | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC | L3 |
| 1 | 68pf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 4.7nf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 4.7pf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | <14pf | CP_Elec_6.3x4.5 | C4 |
| 1 | 100pf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 6.8nf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220nf | C_Disc_D7.5mm_W4.4mm_P5.00mm | C7 |
| 2 | 10uf | CP_Radial_D5.0mm_P2.50mm | C9, C10 |
| 1 | 100nf | C_Disc_D3.0mm_W2.0mm_P2.50mm | C11 |
| 1 | 470uf | CP_Radial_D8.0mm_P3.80mm | C12 |
| 1 | 4.7nf | C_Disc_D7.5mm_W4.4mm_P5.00mm | C99 |
| 1 | 1.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 3 | 18k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R8, R9 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R6 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
Radiofm design files
The KiCad project lives in the eccnil/radiofm repository on GitHub; these links point at the commit this page was built from.
- LayoutRadio.kicad_pcb
- SchematicRadio.kicad_sch
Radiofm: common questions
How big is the Radiofm PCB?
The Radiofm measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radiofm?
38 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Radiofm design files?
From the eccnil/radiofm repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Radiofm design in my own project?
The repository has no license, so all rights stay with eccnil. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568