HardLabs

RGB-Redox

ee-nv-works·RGB-Redox·RGB-Redox-Project-file/redox.kicad_pcb

RGB-Redox PCB layout, top view — open source AVR/Arduino board by ee-nv-works

About the RGB-Redox PCB

RGB-Redox is an open source AVR/Arduino PCB design by ee-nv-works, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 163.3 × 126.5 mm, with 132 components from 10 distinct parts.

Its main chip is the Sparkfun_Pro_Micro, from the AVR/Arduino family. By type, the board carries 70 diodes, 36 switches, 20 capacitors, 3 resistors, 2 connectors and 1 IC.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Reversible redox PCB keyboard based off Pro Micro w/SK6812 MINI-E

RGB-Redox, from the project README
From the project README

Main components on the RGB-Redox

Sparkfun_Pro_Micro

RGB-Redox bill of materials (BOM)

132 components, 10 distinct parts.

QtyPartRefs
1
Sparkfun_Pro_Micro
U1
1
AudioJack4
J1
1
Conn_01x03_Male
J2
35
Cherry_Mx
SW1, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +27
1
SW_Push
SW2
35
1N4148
D1, D2, D3, D4, D5, D11, D12, D13 +27
35
SK6812MINI-e
D6, D7, D8, D9, D10, D16, D17, D18 +27
20
C_Small
C1, C2, C3, C4, C5, C11, C12, C13 +12
2
4.7k
R1, R2
1
100
R38

RGB-Redox design files

The KiCad project lives in the ee-nv-works/RGB-Redox repository on GitHub; these links point at the commit this page was built from.

RGB-Redox: common questions

What microcontroller does the RGB-Redox use?

The RGB-Redox is built around the Sparkfun_Pro_Micro, from the AVR/Arduino family.

How big is the RGB-Redox PCB?

The RGB-Redox measures 163.3 × 126.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RGB-Redox?

132 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the RGB-Redox design files?

From the ee-nv-works/RGB-Redox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RGB-Redox design in my own project?

Yes, under the terms of its BSD-3-Clause license, which ee-nv-works chose for the repository.

Can I test firmware for the RGB-Redox without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards