14 open source boards using the Sparkfun_Pro_Micro
Real designs built with the Sparkfun_Pro_Micro, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
87-88 Pontiac Fiero OEM Drop-In Headlight Module
gekko3622
90 × 90 mm38 parts2LCC-BY-NC-4.02FreeMacro
pentodeman
100 × 92 mm119 parts2LGPL-3.01AVR/Arduino
Lilac-V1
coolerzanu
299.9 × 123.9 mm182 parts2LNo license0RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0AVR/Arduino
RGB-Redox
ee-nv-works
163.3 × 126.5 mm132 parts2LBSD-3-Clause0AVR/Arduino
Usbjoystick d12 a4 r1 rev2.0
nealpalmer
43 × 58 mm63 parts2LGPL-3.00AVR/Arduino
Makropad
doenertrinker909
137.2 × 82.6 mm53 parts2LNo license0IR-Buddy
jaysonlarose
55.9 × 37.6 mm27 parts2LNo license0AVR/Arduino
Zizhuo hackpad
yuheng28
64.7 × 63.5 mm16 parts2LNo license0AVR/Arduino
Chess clock
vekkuli
102 × 45 mm12 parts2LMIT0433 mesh hw
oh3bsg
35 × 82 mm6 parts2LNo license087-88 Fiero Headlight Controller
gekko3622
90 × 90 mm38 parts2LCC-BY-NC-4.02433 mesh hw2
oh3bsg
35 × 82 mm5 parts2LNo license0AVR/Arduino
LogicAnalizer
John-Lluch
148 × 70 mm98 parts4LNo license10
How designs wire the Sparkfun_Pro_Micro
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the Sparkfun_Pro_Micro connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin is left unconnected on 10 of 12 designs (a signal on 2).
- The RAW pin is left unconnected on 10 of 12 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 4, 23 | Connected to: GND 75% · not connected 19% | — |
| VCCpin 21 | Connected to: 5V 75% · a signal 17% | — |
| RSTpin 22 | Connected to: Not connected 83% · a signal 17% | — |
| RAWpin 24 | Connected to: Not connected 83% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LogicAnalizer by John-Lluch, 87-88 Pontiac Fiero OEM Drop-In Headlight Module by gekko3622, FreeMacro by pentodeman and Lilac-V1 by coolerzanu.
The Sparkfun_Pro_Micro in open source designs
The gallery holds 14 open source boards using the Sparkfun_Pro_Micro from 12 GitHub repositories; a typical one measures about 95 × 82.3 mm and carries around 46 components.
93% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is LogicAnalizer by John-Lluch.
Microcontrollers on boards using the Sparkfun_Pro_Micro
What boards using the Sparkfun_Pro_Micro are built for
Sparkfun_Pro_Micro: common questions
Where can I find a Sparkfun_Pro_Micro reference design?
Each of the 14 boards on this page is a real design using the Sparkfun_Pro_Micro. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Sparkfun_Pro_Micro RST pin connected?
The RST pin is left unconnected on 10 of 12 designs (a signal on 2). Counted from the KiCad layouts of 12 open source designs using the Sparkfun_Pro_Micro.
How is the Sparkfun_Pro_Micro RAW pin connected?
The RAW pin is left unconnected on 10 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the Sparkfun_Pro_Micro.
Which microcontrollers do boards using the Sparkfun_Pro_Micro use?
Most are built on AVR/Arduino (7) and RP2040/RP2350 (1).
How big is a typical board using the Sparkfun_Pro_Micro?
The median is 95 × 82.3 mm, and 93% are two-layer designs.
What is the most popular open source board using the Sparkfun_Pro_Micro?
By GitHub stars, LogicAnalizer by John-Lluch, with 10 stars.
Can I simulate one of these boards using the Sparkfun_Pro_Micro before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.