HardLabs

EE6013

eeddy·EE6013·Power_Board/Project Outputs for Power_Board/Power_Board.NET

This repository ships a schematic but no board layout.
Simulate this board

About the EE6013 PCB

EE6013 is an open source ESP32 PCB design by eeddy, published on GitHub. It is a board, with 13 components from 6 distinct parts.

Other key parts include the TLV9002IDSGR. By type, the board carries 9 connectors, 2 ICs and 1 capacitor.

Main components on the EE6013

TLV9002IDSGR

EE6013 bill of materials (BOM)

13 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC-1-N8R2XCVR_ESP32-S3-DEVKITC-1-N8R2
Texas Instruments
U1
1
TLV9002IDSGR
Texas Instruments
U2
1
B2B-PH-K-S(LF)(SN)JST_B2B-PH-K-S(LF)(SN)
3M
J1
8
61300411121
P0, P1, P2, P3, P4, P5, P6, P7
1
TLV75801PDBVR
NU2
1
1uF
TDK
C4

EE6013 design files

The KiCad project lives in the eeddy/EE6013 repository on GitHub; these links point at the commit this page was built from.

EE6013: common questions

How many components are on the EE6013?

13 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EE6013 design files?

From the eeddy/EE6013 repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the EE6013 design in my own project?

The repository has no license, so all rights stay with eeddy. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EE6013 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards