HardLabs

OmniDeck

Efe-Cal·OmniDeck·pcb/OmniDeck.kicad_pcb

OmniDeck PCB layout, top view — open source RP2040/RP2350 board by Efe-Cal

About the OmniDeck PCB

OmniDeck is an open source RP2040/RP2350 PCB design by Efe-Cal, published on GitHub. It is a 2-layer board measuring 89.2 × 54.7 mm, with 9 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches, 1 IC and 1 LED.

From the project

A custom stream deck

Main components on the OmniDeck

XIAO-RP2040-DIP

OmniDeck bill of materials (BOM)

9 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
RotaryEncoder_Switch
SW7
1
~
DS1

OmniDeck design files

The KiCad project lives in the Efe-Cal/OmniDeck repository on GitHub; these links point at the commit this page was built from.

OmniDeck: common questions

What microcontroller does the OmniDeck use?

The OmniDeck is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the OmniDeck PCB?

The OmniDeck measures 89.2 × 54.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OmniDeck?

9 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OmniDeck design files?

From the Efe-Cal/OmniDeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OmniDeck design in my own project?

The repository has no license, so all rights stay with Efe-Cal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OmniDeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in OmniDeck

Similar boards