PD Charger
electricalhog·PD_Charger·KiCad/PD Charger.kicad_pcb
About the PD Charger PCB
PD Charger is an open source STM32 PCB design by electricalhog, published on GitHub. It is a 4-layer board measuring 74 × 46 mm, with 120 components from 56 distinct parts.
Its main chip is the STM32G431CBUx, from the STM32 family. Other key parts include the FUSB302B01MPX, LMR36006BRNXT, LT8390xFE, ADM1270ACPZ and INA293A2. By type, the board carries 50 capacitors, 42 resistors, 9 transistors, 7 ICs, 4 diodes and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Wide swing DC input to USB-PD source capable of USBPD1.2 and EPR up to 240W.

Main components on the PD Charger
PD Charger bill of materials (BOM)
120 components, 56 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSB302B01MPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U1 |
| 1 | LMR36006BRNXT | RNX0012B | U2 |
| 1 | LT8390xFE | TSSOP-28-1EP_4.4x9.7mm_P0.65mm | U3 |
| 1 | STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 1 | ADM1270ACPZ | LFCSP-16-1EP_3x3mm_P0.5mm_EP1.5x1.5mm | U5 |
| 1 | INA293A2 | SOT-23-5 | U6 |
| 1 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U7 |
| 4 | NMOS | ECP2302 | Q1, Q2, Q3, Q4 |
| 4 | SiR5607DP | AO_DFN-8-1EP_5.55x5.2mm_P1.27mm_EP4.12x4.6mm | Q5, Q6, Q7, Q8 |
| 1 | Q_Dual_NMOS_S1G1D2S2G2D1 | SOT-363_SC-70-6 | Q9 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | XT60_M | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J3 |
| 1 | 960-21-18-D-AB-0 | 960-21-xx-D | HS1 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 2 | SW_MEC_5G | SW_SPST_B3U-1000P-B | SW1, SW2 |
| 3 | 3.425 | CR_PLZ5V1C_VIS | D1, D2, D3 |
| 1 | 22 | CR_PLZ5V1C_VIS | D4 |
| 1 | 4.7u | L_Vishay_IHLP-6767 | L1 |
| 1 | 33u | L_Wuerth_MAPI-3015 | L2 |
| 13 | 10u | C_1206_3216Metric | C1, C2, C3, C12, C13, C16, C17, C18 +5 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.47u | C_0603_1608Metric | C4, C26 |
| 2 | 4.7n | C_0603_1608Metric | C5, C7 |
| 1 | 100p | C_0603_1608Metric | C6 |
| 5 | 0.1u | C_0603_1608Metric | C8, C22, C23, C24, C25 |
| 9 | 0.47u | C_0805_2012Metric | C9, C10, C27, C28, C34, C35, C36, C38 +1 |
| 2 | 1u | C_0603_1608Metric | C11, C29 |
| 2 | 82u | CP_Elec_10x7.9 | C14, C15 |
| 6 | 100n | C_0603_1608Metric | C20, C21, C30, C37, C40, C41 |
| 1 | 20p | C_0603_1608Metric | C31 |
| 2 | 330p | C_0603_1608Metric | C42, C43 |
| 2 | 1uF | C_0603_1608Metric | C44, C47 |
| 1 | 20nF | C_0603_1608Metric | C45 |
| 1 | 50nF | C_0603_1608Metric | C46 |
| 1 | 1n | C_0603_1608Metric | C48 |
| 11 | 100k | R_0603_1608Metric | R1, R4, R7, R14, R17, R19, R23, R28 +3 |
| 1 | 27k | R_0603_1608Metric | R2 |
| 1 | 33k | R_0603_1608Metric | R3 |
| 1 | 5m | R_Shunt_Ohmite_LVK12 | R5 |
| 1 | 12m | R_Shunt_Ohmite_LVK12 | R6 |
| 2 | 51k | R_0603_1608Metric | R8, R13 |
| 4 | 1 | R_0603_1608Metric | R9, R10, R11, R12 |
| 1 | 36k | R_0603_1608Metric | R15 |
| 2 | 5820 | R_0603_1608Metric | R16, R18 |
| 1 | 43.2k | R_0603_1608Metric | R20 |
| 1 | 9k | R_0603_1608Metric | R21 |
| 1 | ~ | R_0603_1608Metric | R22 |
| 2 | 0 | R_0603_1608Metric | R24, R33 |
| 1 | 2m | R_Shunt_Ohmite_LVK12 | R25 |
| 2 | 10k | R_0603_1608Metric | R26, R27 |
| 1 | 4.3k | R_0603_1608Metric | R29 |
| 1 | 29k | R_0603_1608Metric | R32 |
| 1 | 68k | R_0603_1608Metric | R34 |
| 1 | 1.2k | R_0603_1608Metric | R35 |
| 2 | 10 | R_0603_1608Metric | R36, R37 |
| 3 | 2k | R_0603_1608Metric | R39, R40, R41 |
| 1 | 22k | R_0603_1608Metric | R42 |
PD Charger design files
The KiCad project lives in the electricalhog/PD_Charger repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/PD Charger.kicad_pcb
- SchematicKiCad/PD Charger.kicad_sch
PD Charger: common questions
What microcontroller does the PD Charger use?
The PD Charger is built around the STM32G431CBUx, from the STM32 family.
How big is the PD Charger PCB?
The PD Charger measures 74 × 46 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PD Charger?
120 components, from 56 distinct parts. The full bill of materials is listed on this page.
Where can I download the PD Charger design files?
From the electricalhog/PD_Charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PD Charger design in my own project?
The repository has no license, so all rights stay with electricalhog. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PD Charger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k