24 open source boards using the TPD4E05U06DQA
Real designs built with the TPD4E05U06DQA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HPM6P41 BB
Alipay1
100 × 80.3 mm276 parts4LMIT14Rtcl tp25k usb3
ryuz
80 × 35 mm91 parts4LNo license5RISC-V
VVDAP
ai03-2725
30 × 41.5 mm53 parts2LGPL-3.01STM32
Micro
IslamHUFE
60 × 60 mm34 parts6LCustom license1STM32
PD Charger
electricalhog
74 × 46 mm120 parts4LNo license0STM32
Sichergo left
steewbsd
144.7 × 98.2 mm118 parts2LNo license0RP2040/RP2350
LFX FC R2
nguyencanhanh
50 × 50 mm113 parts4LMIT0Usb c one
fgihl
50 × 40 mm83 parts4LNo license0STM32
UsbMeter
TheBadZhang
17.5 × 50 mm68 parts4LNo license0RP2040/RP2350
MRev
MrFriedOk
60 × 50 mm60 parts2LNo license0ESP32
Ambient air
mawoka-myblock
50 × 35 mm51 parts2LNo license0Microchip SAM
Cam Hat Case Study
auxren
65 × 30 mm42 parts2LMIT0RP2040/RP2350
Rp2040
IslamHUFE
48.1 × 41.6 mm32 parts4LMIT0ESP32
Esp32-ble sensor
philipcristiano
27.5 × 89 mm29 parts2LNo license0- schematic only · 85 partsRP2040/RP2350
Electronics
hjosugi
85 partsMIT0 STM32
Sichergo right
steewbsd
144.7 × 98.2 mm100 parts2LNo license0LFX LTE R1
nguyencanhanh
46 × 46 mm67 parts4LMIT0RP2040/RP2350
TallRev
MrFriedOk
85.7 × 110 mm60 parts2LNo license0ESP32
Stencil
mawoka-myblock
50 × 35 mm47 parts2LNo license0STM32
UsbMeter2
TheBadZhang
17.5 × 40.3 mm40 parts2LNo license0RP2040/RP2350
WideRev
MrFriedOk
173.8 × 66.7 mm57 parts2LNo license0ESP32
Main
mawoka-myblock
50 × 35 mm36 parts2LNo license0RP2040/RP2350
Rev3
MrFriedOk
47.6 × 76.2 mm56 parts2LNo license0RP2040/RP2350
Pico2350-W-Pro-R2
zeankundev
21 × 51 mm69 parts4LNo license1
How designs wire the TPD4E05U06DQA
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TPD4E05U06DQA connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 8 | Connected to: GND 93% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HPM6P41 BB by Alipay1, Rtcl tp25k usb3-pcb by ryuz, VVDAP by ai03-2725 and Micro by IslamHUFE.
The TPD4E05U06DQA in open source designs
The gallery holds 24 open source boards using the TPD4E05U06DQA from 16 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 60 components.
57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is HPM6P41 BB by Alipay1.
Parts used alongside the TPD4E05U06DQA
Microcontrollers on boards using the TPD4E05U06DQA
What boards using the TPD4E05U06DQA are built for
TPD4E05U06DQA: common questions
Where can I find a TPD4E05U06DQA reference design?
Each of the 24 boards on this page is a real design using the TPD4E05U06DQA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPD4E05U06DQA?
The SHT4x, RP2040, W25Q128JVS and W25Q32JVZP appear in the most repositories here.
Which microcontrollers do boards using the TPD4E05U06DQA use?
Most are built on RP2040/RP2350 (8), STM32 (6), ESP32 (4) and RISC-V (1).
How big is a typical board using the TPD4E05U06DQA?
The median is 50 × 50 mm, and 57% are two-layer designs.
What is the most popular open source board using the TPD4E05U06DQA?
By GitHub stars, HPM6P41 BB by Alipay1, with 14 stars.
Can I simulate one of these boards using the TPD4E05U06DQA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.