Reciever
About the Reciever PCB
Reciever is an open source ESP32 PCB design by Electrium-Mobility, published on GitHub. It is a 2-layer board measuring 38 × 26.8 mm, with 22 components from 14 distinct parts.
Its main chip is the C5736265, from the ESP32 family. Other key parts include the C53434, C3235556, C118233 and C2652876. By type, the board carries 5 ICs, 5 diodes, 5 capacitors, 4 resistors and 3 connectors.
From the project
Electrium Mobility W25 Remote Control Project
Main components on the Reciever
Reciever bill of materials (BOM)
22 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C53434 TXS0102DCU | VSSOP-8_2.3x2mm_P0.5mm | U1 |
| 1 | C3235556 LM66200 | SOT-583-8 | U2 |
| 1 | C118233 SE5218ALG-LF | SOT-23-5 | U3 |
| 1 | C5736265 ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U4 |
| 1 | C2652876 TCAN330DR | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U5 |
| 1 | C165948 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | C50137 UART/I2C | CONN-SMD_PH2.0-4PWB | J2 |
| 1 | C50137 TWAI | CONN-SMD_PH2.0-4PWB | J3 |
| 5 | C316043 15V TVS | D_0402_1005Metric | D1, D2, D3, D4, D5 |
| 2 | C338067 2.2uF | C_0402_1005Metric | C1, C2 |
| 2 | C22435938 100nF | C_0402_1005Metric | C3, C5 |
| 1 | C380337 22uF | C_0805_2012Metric | C4 |
| 2 | C852861 5.1k | R_0402_1005Metric | R5, R6 |
| 2 | C190095 10k | R_0402_1005Metric | R7, R8 |
Reciever design files
The KiCad project lives in the Electrium-Mobility/RC-W25 repository on GitHub; these links point at the commit this page was built from.
Reciever: common questions
What microcontroller does the Reciever use?
The Reciever is built around the C5736265, from the ESP32 family.
How big is the Reciever PCB?
The Reciever measures 38 × 26.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Reciever?
22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Reciever design files?
From the Electrium-Mobility/RC-W25 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Reciever design in my own project?
The repository has no license, so all rights stay with Electrium-Mobility. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Reciever without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in RC-W25
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k