HardLabs

Stripboard-Designer

ElliOl·Stripboard-Designer

This repository ships a schematic but no board layout.

About the Stripboard-Designer PCB

Stripboard-Designer is an open source AVR/Arduino PCB design by ElliOl, published on GitHub. It is a board, with 113 components from 65 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the TL074 and AS3340. By type, the board carries 53 resistors, 19 connectors, 17 capacitors, 6 diodes, 3 ICs and 2 transistors.

From the project

Netlist to stripboard layout tool

An interactive web-based tool for designing stripboard layouts from KiCad netlists.

- 🎨 Interactive Canvas - Konva-powered visual editing with zoom and pan - 🔧 Component Library - Pre-built footprints for ICs, resistors, capacitors, and more - 📐 Grid-based Layout - Standard 0.1" (2.54mm) stripboard pitch - 🎯 Manual Routing - Full control over strip and wire placement - ⚡ Ratsnest - Visual connection guides - 💾 Import/Export - KiCad netlist support (coming soon) - 🎨 Design Tokens - Customizable theme using CSS variables

Main components on the Stripboard-Designer

TL074AS3340Arduino_Nano_v3.x

Stripboard-Designer bill of materials (BOM)

113 components, 65 distinct parts.

QtyPartRefs
2
TL074
U1, U2
1
AS3340
U3
1
Arduino_Nano_v3.x
A1
2
2N3904
Q1, Q2
1
WQP-WQP518MA
Pulse
J1
1
WQP-WQP518MA
Saw
J2
1
WQP-WQP518MA
Triangle
J3
1
WQP-WQP518MA
Sine
J4
1
WQP-WQP518MA
1/v Oct Out
J5
1
LL1007-1 (2*8 HITEMP)
euro 16
J6
1
WQP-WQP518MA
PWM
J7
1
WQP-WQP518MA
FM
J8
1
WQP-WQP518MA
1v/Oct In
J9
1
WQP-WQP518MA
CV2 in
J10
1
WQP-WQP518MA
Soft Sync
J11
1
WQP-WQP518MA
Hard Sync +
J12
1
WQP-WQP518MA
Hard Sync -
J13
1
Main Board
J14
1
Hard Sync
J15
1
IO Panel
J16
Show 45 more
QtyPartRefs
1
Nano matrix bus main
J17
1
Nano matrix bus IO
J18
1
Matrix IO
J19
1
NetTie_2
NT1
2
100k
RV1, RV6
5
100K
RV2, RV3, RV4, RV10, RV11
1
50k
RV7
2
10k
RV8, RV9
1
Octave
SW1
1
LED_Dual_Bidirectional
D1
1
D_Zener
D2
2
D
D3, D4
1
1n518
D5
1
1n518
D6
2
10nF
C2, C13
7
100nf
C3, C4, C12, C14, C15, C16, C17
1
820pf
C5
1
1uF
C7
4
1nf
C8, C9, C10, C11
2
10uf
C19, C20
3
2k2
R1, R16, R23
5
1K
R2, R26, R33, R49, R57
1
150k
R3
1
3M3
R4
1
470 r
R5
1
270k
R6
13
100k
R7, R8, R9, R12, R30, R31, R32, R34 +5
1
180k
R11
1
2k
R13
3
47k
R14, R15, R17
4
10k
R18, R21, R38, R39
1
390r
R19
1
1k8
R20
1
24k
R22
1
5k6
R24
2
1M
R25, R41
1
10k or 15k
R27
3
91k
R28, R51, R56
1
15k
R29
1
20k
R37
1
1M2
R40
1
470r
R42
1
680r
R43
1
4k7
R48
3
240k
R53, R55, R58

Stripboard-Designer design files

The KiCad project lives in the ElliOl/Stripboard-Designer repository on GitHub; these links point at the commit this page was built from.

Stripboard-Designer: common questions

What microcontroller does the Stripboard-Designer use?

The Stripboard-Designer is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How many components are on the Stripboard-Designer?

113 components, from 65 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stripboard-Designer design files?

From the ElliOl/Stripboard-Designer repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Stripboard-Designer design in my own project?

The repository has no license, so all rights stay with ElliOl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stripboard-Designer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards