15 open source boards using the AS3340
Real designs built with the AS3340, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
KOSMO Roundhouse
sebastianbeyer
75 × 200 mm149 parts2LNo license73340Breakout
Sonosus
34 × 93.5 mm36 parts2LCC-BY-SA-4.07STM32
FinalThesis
RamsesKlap
254.3 × 169.3 mm625 parts4LNo license0VCO
carl-becker
100 × 100 mm108 parts2LNo license0STM32
TunerVCO STM32
hsetlik
45.7 × 110 mm82 parts4LNo license0Eurorack-VCO-Module
d65134034-design
50.5 × 110 mm4 parts2LMIT0- schematic only · 113 partsAVR/Arduino
Stripboard-Designer
ElliOl
113 partsNo license0 Cem3340
jhitesma
100 × 70 mm31 parts2LMIT14Z3340 VCO
brer-rabbit
80 × 80 mm139 parts4LGPL-3.068Cem3340 board mount
jhitesma
100 × 70 mm31 parts2LMIT14VCO-3340
mort13
48.8 × 110 mm102 parts2LGPL-3.01201 as3340 vco
bmurauer
60 × 108 mm96 parts2LNo license0Cem3340 one
jhitesma
100 × 70 mm28 parts2LMIT14Synth
adeboni
50.5 × 100 mm108 parts4LGPL-3.00Vco
eblade
99.1 × 99.1 mm60 parts2LNo license0
How designs wire the AS3340
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the AS3340 connects to, and the resistors, capacitors and other passives placed on it.
- The SCALE1 pin has a series resistor on 11 of 11 designs, most often 24 kΩ (then 22 kΩ).
- The VFCI pin has a series resistor on 11 of 11 designs, most often 100 kΩ (then 470 Ω).
- The VS pin has a resistor to GND on 10 of 11 designs, most often 1.8 kΩ (then 2 kΩ).
- The SCALE2 pin has a series resistor on 9 of 11 designs, most often 5.6 kΩ (then 5 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCALE1pin 1 | Connected to: Signal 100% |
|
| SCALE2pin 2 | Connected to: Signal 100% |
|
| VEEpin 3 | Connected to: Signal 82% · -5V 18% |
|
| VPpin 4 | Connected to: TL074 27% |
|
| VPWMpin 5 | Connected to: TL072 27% · not connected 18% |
|
| VHSIpin 6 | Connected to: Signal 73% · not connected 27% |
|
| VSOpin 8 | Connected to: TL074 36% |
|
| VTOpin 10 | Connected to: TL074 45% |
|
| CAPpin 11 | Connected to: Signal 100% |
|
| GNDpin 12 | Connected to: GND 100% | — |
| VLFIpin 13 | Connected to: Signal 100% |
|
| VSpin 14 | Connected to: Signal 100% |
|
| VFCIpin 15 | Connected to: Signal 100% |
|
| VCCpin 16 | Connected to: 12V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z3340 VCO by brer-rabbit, Cem3340 by jhitesma, VCO-3340 by mort13 and KOSMO Roundhouse by sebastianbeyer.
The AS3340 in open source designs
The gallery holds 15 open source boards using the AS3340 from 13 GitHub repositories; a typical one measures about 77.5 × 100 mm and carries around 96 components.
71% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is Z3340 VCO by brer-rabbit.
Microcontrollers on boards using the AS3340
What boards using the AS3340 are built for
AS3340: common questions
Where can I find a AS3340 reference design?
Each of the 15 boards on this page is a real design using the AS3340. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AS3340 SCALE1 pin?
The SCALE1 pin has a series resistor on 11 of 11 designs, most often 24 kΩ (then 22 kΩ). Counted from the KiCad layouts of 11 open source designs using the AS3340.
What resistor goes on the AS3340 VFCI pin?
The VFCI pin has a series resistor on 11 of 11 designs, most often 100 kΩ (then 470 Ω). Counted from the KiCad layouts of 11 open source designs using the AS3340.
What resistor goes on the AS3340 VS pin?
The VS pin has a resistor to GND on 10 of 11 designs, most often 1.8 kΩ (then 2 kΩ). Counted from the KiCad layouts of 11 open source designs using the AS3340.
What parts are used alongside the AS3340?
The TL074, TL072 and AS3360 appear in the most repositories here.
Which microcontrollers do boards using the AS3340 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the AS3340?
The median is 77.5 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the AS3340?
By GitHub stars, Z3340 VCO by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the AS3340 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.