HardLabs

Asme rover elec prog

Eltohfa·asme_rover_elec_prog·Schematics/Rover Voltage Sense/Rover Voltage Sense.kicad_pcb

Asme rover elec prog PCB layout, top view — open source AVR/Arduino board by Eltohfa

About the Asme rover elec prog PCB

Asme rover elec prog is an open source AVR/Arduino PCB design by Eltohfa, published on GitHub under the Unlicense license. It is a 4-layer board measuring 108.5 × 66.6 mm, with 102 components from 23 distinct parts.

Its main chip is the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family. Other key parts include the MCP33151, INA229, TPSM828512 and 74HC138. By type, the board carries 41 capacitors, 26 resistors, 23 connectors, 10 ICs, 1 module and 1 diode.

From the project

Electrical and Programs for Purdue ASME Rover

Main components on the Asme rover elec prog

MCP33151INA229TPSM82851274HC138Arduino_Mega2560_R3_Shield

Asme rover elec prog bill of materials (BOM)

102 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
7
MCP33151
U1, U3, U5, U7, U9, U11, U13
1
INA229
U15
1
TPSM828512
U16
1
74HC138
U17
1
Arduino_Mega2560_R3_Shield
A1
8
Conn_01x02
J1, J2, J3, J4, J5, J6, J7, J22
6
Conn_01x03
J8, J9, J10, J11, J12, J13
8
Conn_01x04
J14, J15, J16, J17, J18, J19, J20, J21
1
Conn_01x02
J23
1
LED
D1
14
2.2n
C1, C2, C3, C4, C5, C6, C7, C8 +6
1
100n
C15
8
10u
C16, C28, C29, C30, C31, C32, C33, C34
1
680p
C17
1
10p
C18
1
22u
C19
8
0.1u
C20, C21, C22, C23, C24, C25, C26, C27
7
1u
C35, C36, C37, C38, C39, C40, C41
14
15
R1, R2, R4, R5, R7, R8, R10, R11 +6
8
10K
R3, R6, R9, R12, R15, R18, R21, R24
Show 3 more
QtyPartRefs
1
250
R22
2
100k
R25, R27
1
200k
R26

Asme rover elec prog design files

The KiCad project lives in the Eltohfa/asme_rover_elec_prog repository on GitHub; these links point at the commit this page was built from.

Asme rover elec prog: common questions

What microcontroller does the Asme rover elec prog use?

The Asme rover elec prog is built around the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family.

How big is the Asme rover elec prog PCB?

The Asme rover elec prog measures 108.5 × 66.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Asme rover elec prog?

102 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Asme rover elec prog design files?

From the Eltohfa/asme_rover_elec_prog repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Asme rover elec prog design in my own project?

Yes, under the terms of its Unlicense license, which Eltohfa chose for the repository.

Can I test firmware for the Asme rover elec prog without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards