Fishy8
EmanuelKrabNL·Fishy8·project files/FISHY8.kicad_pcb
About the Fishy8 PCB
Fishy8 is an open source PCB design by EmanuelKrabNL, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 10 components from 10 distinct parts.
By type, the board carries 4 connectors, 2 capacitors, 1 fuse, 1 diode and 1 resistor.
It belongs with the retro computing and audio designs in this gallery.
From the project
PCB with vintage camera looking footage. A microphone and a fisheye lens.
Okay, name explained first FISHeYe lens + hi8 = FISHY8! Original name was FISH8 but FISHY8 sounds more jolly.
Why have i made it? Those old sony handycams are increndibly hard to get. Except if you live near the old camera market in barcelona (I still hate that it wasnt open when i was there.), so, why not make one that costs a one time payment of max 120 bucks, and doesnt require extra additions like those 100 dollar converters. but has a 15 dollar converter inside of it! Disclaimer: this project does not require any firmware, and gets over the 30 dollar limit. I will pay for it with my own…
Fishy8 bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRABBER | WirePads_1x03_P2.54 | J1 |
| 1 | CAMERA | WirePads_1x03_P2.54 | J2 |
| 1 | max4466 mic | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | grabber audio | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | MF-R050 | MF_R050_P5.10 | F1 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | POWER_LED | LED_Kingbright_L934ID_TNB2.54_P2.54_Drill1.20 | D1 |
| 1 | 100nF | C_Vishay_K104K15X7RF5TH5_P5.00 | C1 |
| 1 | 100uf bipolar 16v | C_Radial_D10.0mm_H12.5mm_P5.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Fishy8 design files
The KiCad project lives in the EmanuelKrabNL/Fishy8 repository on GitHub; these links point at the commit this page was built from.
- Layoutproject files/FISHY8.kicad_pcb
- Schematicproject files/FISHY8.kicad_sch
Fishy8: common questions
How big is the Fishy8 PCB?
The Fishy8 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fishy8?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fishy8 design files?
From the EmanuelKrabNL/Fishy8 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fishy8 design in my own project?
Yes, under the terms of its MIT license, which EmanuelKrabNL chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kExpansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0k