Tiva-80pin adapter
About the Tiva-80pin adapter PCB
Tiva-80pin adapter is an open source PCB design by embedded-pro, published on GitHub. It is a 2-layer board measuring 104.7 × 66.7 mm, with 10 components from 4 distinct parts.
By type, the board carries 6 connectors and 4 resistors.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
hardware to be used with https://github.com/embedded-pro/e-foc
A three-phase brushless (BLDC / PMSM) motor driver board designed to run the e-foc Field-Oriented Control firmware.
This repository contains the KiCad electrical design — schematics, project configuration and (eventually) the PCB layout — for the power and signal-chain hardware that the e-foc control software targets. The microcontroller itself lives on a pluggable module; this board provides the power stage, gate drive, current sensing, protection and peripheral connectivity around it.
Tiva-80pin adapter bill of materials (BOM)
10 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x12_Odd_Even | PinHeader_2x12_P2.54mm_Vertical | J1 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J2 |
| 4 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J3, J4, J5, J6 |
| 4 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
Tiva-80pin adapter design files
The KiCad project lives in the embedded-pro/e-foc-hardware repository on GitHub; these links point at the commit this page was built from.
Tiva-80pin adapter: common questions
How big is the Tiva-80pin adapter PCB?
The Tiva-80pin adapter measures 104.7 × 66.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tiva-80pin adapter?
10 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tiva-80pin adapter design files?
From the embedded-pro/e-foc-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tiva-80pin adapter design in my own project?
The repository has no license, so all rights stay with embedded-pro. Use it as a reference, and ask the author before reusing the design.
More boards in e-foc-hardware
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k