21 open source boards using the SX1280IMLTRT

Real designs built with the SX1280IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the SX1280IMLTRT

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SX1280IMLTRT connects to, and the resistors, capacitors and other passives placed on it.

  • The VR_PA pin has a capacitor to GND on 12 of 14 designs, most often 10 nF (then 100 nF).
  • The VDD_IN pin has a capacitor to GND on 12 of 14 designs, most often 10 nF (then 470 nF).
  • The VBAT_IO pin has a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 10 nF).
  • The DCC_FB pin has a capacitor to GND on 12 of 14 designs, most often 10 nF (then 470 nF).
VR_PApin 1Connected to: Signal 79%
  • Capacitor to GND on 86% · 10 nF (12), 100 nF (1), 10 µF (1)
VDD_INpin 2Connected to: Signal 93%
  • Capacitor to GND on 86% · 10 nF (12), 470 nF (9), 100 nF (3)
  • Inductor on 43% · 15 µH (6)
XTApin 4Connected to: Signal 100%
  • Crystal on 43% · 52 MHz (4)
GNDpin 5, 13, 20, 21, 23, 24Connected to: GND 95%
XTBpin 6Connected to: Signal 93%
  • Crystal on 43% · 52 MHz (4)
VBAT_IOpin 11Connected to: 3.3V 79%
  • Decoupling capacitor on 86% · 100 nF (18), 10 nF (2), 10 pF (2)
DCC_FBpin 12Connected to: Signal 100%
  • Capacitor to GND on 86% · 10 nF (11), 470 nF (10), 100 nF (1)
  • Inductor on 43% · 15 µH (6)
DCC_SWpin 14Connected to: Signal 57% · not connected 36%
  • Inductor on 43% · 15 µH (6)
VBATpin 15Connected to: 3.3V 71%
  • Decoupling capacitor on 86% · 100 nF (19), 10 µF (2), 10 pF (2)
SS_CTSpin 19Connected to: The microcontroller 92%
  • Resistor to GND on 33% · 10 kΩ (2), 4.7 kΩ (1), 12 kΩ (1)
RFIOpin 22Connected to: Signal 100%
  • Capacitor to GND on 50% · 8 e-13F (3), 2 pF (1), 4 e-13F (1)
  • Inductor on 50% · 3 nH (4), 3.9 nH (1)
EXPpin 25Connected to: GND 91%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bluetooth and-Mioty-Localization-Hardware by Chandubreddy819, DangerDoughnut by gavin4d, PHOBOS Control by K-Eckert15 and Elrs receiver pcb by Prateek-elec.

The SX1280IMLTRT in open source designs

The gallery holds 21 open source boards using the SX1280IMLTRT from 14 GitHub repositories; a typical one measures about 50 × 49.9 mm and carries around 55 components.

71% use four copper layers or more, and 5% carry an open source license.

The most starred is DangerDoughnut by gavin4d.

Microcontrollers on boards using the SX1280IMLTRT

SX1280IMLTRT: common questions

Where can I find a SX1280IMLTRT reference design?

Each of the 21 boards on this page is a real design using the SX1280IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SX1280IMLTRT VR_PA pin connected?

The VR_PA pin has a capacitor to GND on 12 of 14 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the SX1280IMLTRT.

How is the SX1280IMLTRT VDD_IN pin connected?

The VDD_IN pin has a capacitor to GND on 12 of 14 designs, most often 10 nF (then 470 nF). Counted from the KiCad layouts of 14 open source designs using the SX1280IMLTRT.

What decoupling capacitors do designs use on the SX1280IMLTRT VBAT_IO pin?

The VBAT_IO pin has a decoupling capacitor on 12 of 14 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 14 open source designs using the SX1280IMLTRT.

What parts are used alongside the SX1280IMLTRT?

The AT7456E, ESP8285, ICM-42688-P, MMC5983MA and W25Q128JVSIQ appear in the most repositories here.

Which microcontrollers do boards using the SX1280IMLTRT use?

Most are built on STM32 (7), ESP32 (5), RP2040/RP2350 (4) and ESP8266 (1).

How big is a typical board using the SX1280IMLTRT?

The median is 50 × 49.9 mm, and 29% are two-layer designs.

What is the most popular open source board using the SX1280IMLTRT?

By GitHub stars, DangerDoughnut by gavin4d, with 1 stars.

Can I simulate one of these boards using the SX1280IMLTRT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part