Ismd fc sensortest
About the Ismd fc sensortest PCB
Ismd fc sensortest is an open source NXP PCB design by EmmardFr, published on GitHub under the MIT license. It is a 2-layer board measuring 102.7 × 40 mm, with 28 components from 16 distinct parts.
Its main chip is the TEENSY 4.1, from the NXP family. By type, the board carries 18 capacitors and 1 IC.
It belongs with the robotics & motion, sensors and dev boards & breakouts designs in this gallery.
From the project
- Hardware/ contains hardware design files: - Datasheets/: component datasheets (IMUs, barometers, and related parts) used during hardware selection. - Graphics/: project graphics and visual assets. - Schematics/: standalone schematic libraries/references for key components (e.g.
- Hardware/ contains hardware design files: - Datasheets/: component datasheets (IMUs, barometers, and related parts) used during hardware selection. - Graphics/: project graphics and visual assets. - Schematics/: standalone schematic libraries/references for key components (e.g., sensors and Teensy 4.1). - PCB designs, in development order: 1. ismdflightcomputer (obselete)/ (deprecated early prototype): initial all-in-one flight-computer concept combining Teensy 4.1, multiple IMU/barometer options, and onboard power circuitry. 2. ismdfcsensortest/: dedicated sensor test board used to compare…
Main components on the Ismd fc sensortest
Ismd fc sensortest bill of materials (BOM)
28 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEENSY 4.1 | TEENSY41 | U1 |
| 1 | BMP581 | BMP581 | B1 |
| 1 | DPS368 | LGA8S145X65P2X4_200X250X110-V | B2 |
| 1 | ICP-20100 | PQFN50P200X200X85-10N | B3 |
| 1 | MS5611 | SON125P500X300X100-8N | B4 |
| 1 | LPS22DF | ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | B5 |
| 1 | ICM-42688 | PQFN50P300X250X97-14N | I1 |
| 1 | BMI088 | Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumbering | I2 |
| 1 | BMI270 | XDCR_BMI270 | I3 |
| 1 | ISM330DLC | PQFN50P250X300X86-14N | I4 |
| 1 | CL31A106KBHNNNE 100nF | C_0402_1005Metric | C1 |
| 2 | CC0805KRX7R9BB104 100nF | C_0402_1005Metric | C2, C3 |
| 12 | 100nF | C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C13, C14 +4 |
| 1 | 0.1uF | C_0402_1005Metric | C10 |
| 1 | 2.2uF | C_0402_1005Metric | C11 |
| 1 | 10nF | C_0402_1005Metric | C12 |
Ismd fc sensortest design files
The KiCad project lives in the EmmardFr/Drone-Project repository on GitHub; these links point at the commit this page was built from.
Ismd fc sensortest: common questions
What microcontroller does the Ismd fc sensortest use?
The Ismd fc sensortest is built around the TEENSY 4.1, from the NXP family.
How big is the Ismd fc sensortest PCB?
The Ismd fc sensortest measures 102.7 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ismd fc sensortest?
28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ismd fc sensortest design files?
From the EmmardFr/Drone-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ismd fc sensortest design in my own project?
Yes, under the terms of its MIT license, which EmmardFr chose for the repository.
Can I test firmware for the Ismd fc sensortest without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in Drone-Project
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532