HardLabs

Carrier PCB v2

EmmardFr·Drone-Project·Hardware/Carrier_PCB_v2/Carrier_PCB_v2.kicad_pcb

Carrier PCB v2 layout, top view — open source board by EmmardFr
Simulate this board

About the Carrier PCB v2

Carrier PCB v2 is an open source PCB design by EmmardFr, published on GitHub under the MIT license. It is a 2-layer board measuring 102.7 × 40 mm, with 29 components from 16 distinct parts.

By type, the board carries 4 modules, 3 capacitors, 3 resistors, 2 connectors and 1 diode.

It belongs with the robotics & motion, sensors and dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

- Hardware/ contains hardware design files: - Datasheets/: component datasheets (IMUs, barometers, and related parts) used during hardware selection. - Graphics/: project graphics and visual assets. - Schematics/: standalone schematic libraries/references for key components (e.g.

- Hardware/ contains hardware design files: - Datasheets/: component datasheets (IMUs, barometers, and related parts) used during hardware selection. - Graphics/: project graphics and visual assets. - Schematics/: standalone schematic libraries/references for key components (e.g., sensors and Teensy 4.1). - PCB designs, in development order: 1. ismdflightcomputer (obselete)/ (deprecated early prototype): initial all-in-one flight-computer concept combining Teensy 4.1, multiple IMU/barometer options, and onboard power circuitry. 2. ismdfcsensortest/: dedicated sensor test board used to compare…

Carrier PCB v2 bill of materials (BOM)

29 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
5009
M1, M2, M3, M4
2
HC-PM254-8.5H-1X24PZ
HC-PM254-8.5H-1x24PZ
J1, J2
2
5009
3V1, 5V1
1
HXPZ2.54-1X8PWZ
HXPZ2.54-1x8PWZ
ESC1
1
SM08B-SRSS-TB(LF)(SN)
ESC2
1
5011
GND1
8
5009
INT1, NCS1, SBUS1, SCLK1, SDI1, SDO1, SPORT1, TLM1
1
PM2.54-1*10
MPU1
1
HC-PZ254-13.8L-1X4PWA
HC-PZ254-13.8L-1x4PWA
RXSR1
1
532610471
RXSR2
1
NCD0805R1
D1
1
CL31A106KBHNNNE
C1
2
CC0805KRX7R9BB104
C2, C3
1
0805W8F3000T5E
R1
1
0603WAF1002T5E
R2
1
0603WAF2002T5E
R3

Carrier PCB v2 design files

The KiCad project lives in the EmmardFr/Drone-Project repository on GitHub; these links point at the commit this page was built from.

Carrier PCB v2: common questions

How big is the Carrier PCB v2?

The Carrier PCB v2 measures 102.7 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Carrier PCB v2?

29 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Carrier PCB v2 design files?

From the EmmardFr/Drone-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Carrier PCB v2 design in my own project?

Yes, under the terms of its MIT license, which EmmardFr chose for the repository.

More boards in Drone-Project

Earlier revisions in the repo: Carrier_PCB

Similar boards