OpenSolarCoolingHub
EnAccess·OpenSolarCoolingHub·IOT System PCB/Solar Cooling Project.kicad_pcb
About the OpenSolarCoolingHub PCB
OpenSolarCoolingHub is an open source PCB design by EnAccess, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 166 × 173 mm, with 38 components from 6 distinct parts.
Other key parts include the A000067. By type, the board carries 30 connectors and 1 module.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Solar Powered IoT Cooling Hubs.
This repository contains the PCB design files for the IoT Monitoring System used in the Open Solar Cooling Hub, created and managed using KiCAD. The project includes schematics, PCB layout, fabrication files (Gerbers, drill files), assembly files (BOM, Pick & Place), and a 3D model for enclosure design. This guide explains how to open, modify, and produce the PCB using KiCAD.
Main components on the OpenSolarCoolingHub
OpenSolarCoolingHub bill of materials (BOM)
38 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A000067 | MODULE_A000067 | A1 |
| 15 | TS-103-T-A-1 | SAMTEC_TS-103-T-A-1 | J4, J5, J6, J7, J8, J9, J10, J11 +7 |
| 15 | MTSW-104-08-G-S-335 | SAMTEC_MTSW-104-08-G-S-335 | J21, J22, J23, J24, J25, J26, J27, J28 +7 |
| 3 | HMTSW-102-X-X-S-X | SAMTEC_HMTSW-102-X-X-S-X | 5VIN1, 12VIN1, 12VOUT1 |
| 2 | TS-103-T-A-1 | SAMTEC_TS-103-T-A-1 | CURRENTSENSOR1, VOLTAGESENSOR1 |
| 2 | MTLW-108-05-G-S-265 | SAMTEC_MTLW-108-05-G-S-265 | GPRS/GSMMODULE1, RELAYMODULE1 |
OpenSolarCoolingHub design files
The KiCad project lives in the EnAccess/OpenSolarCoolingHub repository on GitHub; these links point at the commit this page was built from.
OpenSolarCoolingHub: common questions
How big is the OpenSolarCoolingHub PCB?
The OpenSolarCoolingHub measures 166 × 173 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpenSolarCoolingHub?
38 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the OpenSolarCoolingHub design files?
From the EnAccess/OpenSolarCoolingHub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OpenSolarCoolingHub design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which EnAccess chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k